Modification of Natural Zeolite to ZSM-5 as CO2 Adsorber

Gregorius Prima Indra Budianto

Abstract


Biogas is a product of the bio-decomposition process in anaerobic conditions. Methane (CH4) and carbon dioxide (CO2) are the compounds of biogas that act in determining the quality of biogas. When the CH4 level is high, the biogas will have a high caloric value; conversely, the increased CO2 levels result in low biogas heating value. One effort to purify biogas is the adsorption process using natural zeolite. Natural zeolite should be modified into ZSM-5 because it has a greater pore diameter than natural zeolite. It is expected that the increase of the efficiency of CO2 adsorption is more significant than natural zeolite. ZSM-5, which is altered from natural zeolite, will be compared to the effectiveness of CO2 adsorption compared to natural zeolite

Keywords


Biogas; adsorpsi; CO2; zeolit alam; ZSM-5.

Full Text:

PDF (Indonesian)


DOI: https://doi.org/10.31315/e.v18i2.4725

Refbacks

  • There are currently no refbacks.

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Eksergi p-ISSN  1410-394X, e-ISSN 2460-8203,  is published by Chemical Engineering Department, Faculty of Industrial Engineering, Universitas Pembangunan Nasional "Veteran" Yogyakarta.

Contact Chemical Engineering Department, UPN "Veteran" Yogyakarta Jl. SWK 104 (Lingkar Utara) Condong catur Sleman Yogyakarta

EKSERGI is associated to APTEKIM (Asosiasi Pendidikan Tinggi Teknik Kimia), Indonesia.


 Creative Commons License

Eksergi by http://jurnal.upnyk.ac.id/index.php/eksergi/index/ is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

 

Lihat Statistik Jurnal Kami