Analysis Of Tensile Strenghth Coconut Coir Fiber Composit Using The Vaccum Bagging Method

Zaqi Arya Zullfawas Ilhami, Ferry Setiawan, Sehono Sehono

Abstract


Abstract

The utilization of coconut fiber currently is limited to making brooms or for burning, necessitating further applications. One of these applications is its use as a reinforcement in composites, enhancing utility value and environmental friendliness. This study focuses on crafting composites from coconut fiber with variations in fiber orientation: random, 0°, and 45°.Tensile testing results reveal that the random fiber orientation variation exhibits the best performance, with a stress of 27.30 MPa, attributed to higher density. The 45° fiber orientation variation has the lowest stress (24.23 MPa) due to a lower fiber count. In bending tests, the random fiber orientation variation again performs the best, with a bending stress of 120 MPa, attributed to its high density that strengthens the structure. The 0° fiber orientation has the lowest bending stress (88.59 MPa) due to lower fiber density.Overall, utilizing coconut fiber as reinforcement in composites shows promising positive outcomes, with the random fiber orientation variation providing the best mechanical performance. This endeavor holds the potential to enhance the economic and ecological value of coconut fiber.

Keywords: Composite, fiber, coconut, tensile, bending


Full Text:

PDF

References


Ayu, R. S. (2018). Pengaruh Alkaliasi NaOH & Pengeringan Dengan Microwave Terhadap Sifat Meknik Serat Kelapa. Skripsi, Universitas Brawijaya, 1–68.

Buli, T., Maryanti, B., & Kartika, S. A. (2021). Analisis Kekuatan Tarik Komposit Serabut Kelapa Merah Dengan Fraksi Volume Menggunakan Resin Epoxy. Jurnal Rekayasa Mesin & Inovasi Teknologi, 2(2), 114–120.

Dwipayana, I. M. A., & Widi, I. K. A. (2020). Analisa Uji Tarik & Uji Impak Komposit Penguat Karbon , Campuran Epoxy-Karet Silikon 30 %, 40 %, 50 %, Rami , Kenaf Matrik Epoxy. 5.

Fajarudin, H., & Widodo, R. D. (2021). Jurnal Inovasi Mesin. Jurnal Inovasi Mesin, 3(1), 20–26.

Farrel, D. A., Yuliyanto, & Zulfitriyanto. (2022). Pengaruh Sifat Mekanik Komposit Serat Sabut Kelapa Bermatrik Polyester Terhadap Pengujian Tarik. Jurnal Indonesia Sosial Teknologi, 3(2), 219–234.

Ferdianto, F., & Suhardiman, S. (2020). Analisa Komposit Diperkuat Serbuk Serabut Kelapa Bermatrik Epoxy Terhadap Kekuatan Tarik. Jurnal Mesin Sains Terapan, 4(2), 78–82.

Harita, E. A., Napitupulu, R., & Krishnaningsih, S. D. (2022). Pengaruh Perlakuan Alkali Terhadap Kekuatan Tarik & Modulus Elastisitas Bahan Komposit Berpenguat Serat Bambu & Filler Serabut Kelapa. Prosiding Seminar Nasional Inovasi Teknologi Terapan 2022, 320–327.

Hidayat, S. (2021). Analisis Kekuatan Laminat Komposit Dengan Sabut Kelapa Sebagai Serat Penguat. Seminar Nasional-XVIII, 26–33.

Hidayat, Salman, & Catur. (2018). Pengaruh fraksi volume serat pan& laut terhadap kekuatan bending & tarik komposit polyester. Jurnal Keilmuan & Terapan Teknik Mesin, 1–8.

Kurniawan, D., Tarkono, & Supriadi, H. (2013). Utilization Of Fiber And Shell Particles Palm Oil As Substitute Materials In Producing Eternite Ceiling. Jurnal FEMA, 1(3), 41–51.

Maryanti, B., Arifin, K., & Saputro, A. N. P. (2019). Karakteristik Kekuatan Impak Komposit Serabut Kelapa Dengan Variasi Panjang Serat. Jurnal Seniati, 339–343.

Nugroho, F. (2017). Pengaruh Kandungan Partikel Serbuk Genteng Sokka Terhadap Kekuatan Tarik & Kekuatan Impak Pada Komposit Bermatriks Epoxy. Conference SENATIK STT Adisutjipto Yogyakarta, 3, 21–28.

Nurfajri, & Arwizet. (2019). Analisis Kekuatan Tarik Komposit Serabut Kelapa & Ijuk Dengan Perlakuan Alkali (NaOH). Journal of Multidicsiplinary Research and Development, 1(4), 791–797.

Pernandos, H., & Kaidir. (2020). Analisa Sifat Mekanik Komposit Polyester Berpenguat Serat Sabut Kelapa Dengan Perendaman Menggunakan Kadar Alkohol 10%. Jurnal Teknik, 1–10.

Priambodo, I., & Chriswadyanto, A. P. (2019). Metode Manufaktur Vacuum Assisted Resin Infusion Untuk Optimasi Sifat Mekanik Komposit Penyusun Propeller Dome. Seminar Nasional Sains Teknologi & Inovasi Indonesia (SENASTINDO AAU), 1(1), 69–76.

Rahmanto, M. H., & Palupi, A. E. (2019). Analisa Kekuatan Tarik & Impak Komposit Berpenguat Serat Kelapa & Tebu Dengan Perendaman Naoh & Mengunakan Resin Polyester. Jurnal Teknik Mesin, 7(3), 31–40.

Ramadhani, M. Z., & Palupi, A. E. (2019). Pengaruh Susunan Komposit Matriks Serat Alam (Kelapa & Tebu) Terhadap Kekuatan Tarik & Impact. Jurnal Teknik Mesin, 7(3), 41–50.

Robiansyah, K., & Irfa’i, M. A. (2021). Pengaruh Orientasi Arah Serat Terhadap Kekuatan Tarik & Kekuatan Bending Komposit Berpenguat Serat Karbon Dengan Matrik Epoxy. Jurnal Teknik Mesin, 9(3), 47–52.

Saidah, A., Susilowati, S. E., Harini, & Nofendri, Y. (2018). Analisa Perbandingan Kekuatan Tarik & Impak Komposit Serat Jerami Padi Polyester Dengan Komposit Serat Jerami Padi - Epoxy. Prosiding Seminar Nasional Aplikasi Sains & Teknologi, 291–298.

Santoso, B. F., Muhammad, F., & Hidayat, S. (2022). Analisis Kekuatan Material Komposit Serabut Kelapa Hasil Metode Press Hand Lay-up dengan Curring Oven pada Variabel Waktu. Jurnal INOVTEK, 2(1), 8–10.

Setiorini, I. A. (2017). Sifat Kuat Tarik & Morfologi Termoplastik Elastomer Dari Komposit Polypropylene & Natural Rubber. Jurnal Teknik Putra Akademika, 8(1), 43–53.

Sidabutar, S. N. S., Maryanti, B., & Ismail, M. F. R. (2020). Analisis Perbandingan Kekuatan Tarik Komposit Berbahan Serat Sabut Kelapa & Serat Buah Bintaro. Jurnal Proton, 12(1), 1–8.

Venkatesan, K., & Bhaskar, G. B. (2020). Evaluation and Comparison of Mechanical Properties of Natural Fiber Abaca-sisal Composite. Fibers and Polymers, 21(7), 1523–1534.




DOI: https://doi.org/10.31315/jmept.v5i1.10524

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 


 



Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats