APLIKASI ADSORBSI KARBON DAN RESIN PENUKAR ION SEBAGAI PENGGANTI PROSES MERRIL CROWE
DOI:
https://doi.org/10.31315/jmept.v1i1.5035Keywords:
Merril crowe, Adsorbsi Karbon Aktif, Resin Penukar Ion, Elektrowinning.Abstract
Pemanfaatan sumber daya mineral semakin meningkat, tidak terkecuali di Indonesia. Saat ini, Indonesia memproduksi sekitar 4% dari produksi emas global. Metode ekstraksi emas yang paling banyak digunakan saat ini adalah metode hidrometalurgi, yaitu metode pelarutan emas menggunakan reagen asam sianida. Proses ini umumnya disebut dengan proses sianidasi untuk mengekstrak kandungan emas dan perak dalam bijih menjadi larutan kaya yang senyawa kompleks sianida emas dan sianida perak. Kemudian tahap pemisahan padat-cair dan rekoveri larutan kaya hasil proses sianidasi umumnya dapat menggunakan beberapa metode kombinasi seperti proses merril crowe, proses adsorsbsi karbon, proses resin penukar ion, dan proses elektrowinning. Penelitian ini bertujuan untuk memberikan gambaran mengenai pertimbangan metode kombinasi antara proses adsorbsi karbon atau proses resin penukar ion yang dikombinasikan dengan proses elektrowinning sebagai pengganti metode merril crowe agar mampu menghasilkan peningkatan perolehan emas dan perak yang signifikan dalam produk akhir berupa dore bullion. melalui studi pustaka terhadap berbagai literatur yang berkaitan dengan tema dan tujuan penelitian. Metode merril crowe merupakan salah satu metode pada tahap pemisahan padat-cair dan rekoveri emas dari larutan kaya hasil sianidasi yang banyak digunakan karena kesederhanaan dan kemudahan kontrol terhadap prosesnya. Namun, metode ini memiliki kekurangan dalam kasus perolehan kadar emas-perak yang rendah dan akibat penambahan serbuk seng dapat menghasilkan pengotor baru pada produk akhir. Kekurangan dari metode merril crowe ini dapat diminimalisir dengan menggunakan metode kombinasi antara proses adsorbsi karbon atau resin penukar ion dan proses elektrowinning. Kombinasi kedua metode tersebut dapat diaplikasikan untuk menggantikan metode merril crowe akibat beberapa keunggulannya dalam segi perolehan emas-perak, tingkat kesterilan proses, dan efisiensi proses rekoveri untuk bijih emas kadar menengan hingga rendah. Namun, pada penerapan kombinasi kedua metode tersebut harus diperhatikan beberapa faktor utama pada proses adsorbsi karbon aktif atau resin penukar ion seperti kapasitas adaptif karbon dan resin, laju adsorpsi, kekuatan mekanik, ketahanan aus, karakteristik reaktivasi, distribusi ukuran partikel, densitas slurry, konsentrasi larutan, suhu operasi, laju alir larutan, serta konduktivitas larutan, voltase, dan efisiensi arus pada proses elektrowinning.References
Anonimus. 2018. Meteks Merryl Crowe. Jakarta:
Universitas Indonesia.
Bailey, P.R. 1987. Application of activated carbon
to gold recovery. Pages 379– 614 in The
Extractive Metallurgy of South Africa.
Edited by G.G. Stanley. Monograph Series
M7. Johannesburg: South African Institute
of Mining and Metallurgy.
Bunzyl, K., and W. Schultz. 1982. Kinetics of
Differentially Small Conversions in
Isotopic and Contact Ion Exchange.
Analytical Chemistry 54:272–277.
Cristovici, M.A. 1986. Recovery of gold from old
tailings ponds. Canadian Institute of
Mining and Metallurgy Bulletin 79:27–33.
Davidson, R.J, dan D. Duncanson. 1977. The elution
of gold from activated carbon using
deionized water. Journal of South African
Institute of Mining and
Metallurgy:77:254–261.
G. Deschênes. 2016. Gold Ore Processing Project
Development and Operations (Second
Edition). Singapore: Fugue Pte Ltd.
Himpunan Mahasiswa Tambang. 2015. UU Minerba
Tahun 2014,
https://hmt.mining.itb.ac.id/uu-minerbatahun-2014/, diakses pada tanggal 02
Februari 2021 pukul 19.33 WIB.
MacDougall, G.J., and R.D. Hancock. 1981. Gold
complexes and activated carbon: A
literature review. Gold Bulletin
:(4):138–153.
Mann, A.W. 1984. Redistribution of the oxidised
zone of some W.A. deposits. In Gold
Mining, Metallurgy and Geology.
Melbourne: Australasian Institute of
Mining and Metallurgy.
Marsden, John.O, dan House, C. Lain. 2009. “The
Chemistry of Gold Extraction Second
Edition”. Colorado: SME.
McQuiston, F.W, dan R.S. Shoemaker. 1975. Gold
and Silver Cyanidation Plant Practice.
Volume 1. SME-AIME Monograph. Salt
Lake City, UT: SME- AIME.
Van Der Merwe, P.F, dan J.S.J. Van Deventer. 1988.
The influence of oxygen on the adsorption
of metal cyanides on activated carbon.
Chemical Engineering Communications
:121–138.
Downloads
Published
Issue
Section
License
Authors who publish in Journal of Metallurgical Engineering and Processing Technology agree to the following terms:
Authors who publish articles in this journal agree to the following terms:
- Copyright remains with the author and gives rights to the Journal of Metallurgical Engineering and Processing Technology as the priority to publish the article with an Creative Commons Atribusi 4.0 Internasional License, which allows the article to be shared with acknowledgment of the author of the article and this journal as the place of publication.
- Authors can distribute the publication of their articles on a non-exclusive basis (for example: on university repositories or books) with notification or acknowledgment of publication in the journal Option
- Authors are allowed to post their work online (for example: on personal websites or in university repositories) before and after the submission process (see The Effect of Open Access)
Journal of Metallurgical Engineering and Processing Technology is licensed under a Creative Commons Atribusi 4.0 Internasional License.