ANALISIS KUALITAS TERHADAP BATUGAMPING QUARRY HINGGA TEPUNG KALSIUM KARBONAT HASIL PRODUKSI DI PT. SUGIH ALAMANUGROHO
DOI:
https://doi.org/10.31315/jmept.v3i1.7038Abstract
Limestone is a rock belonging to the type of sedimentary rock, formed as a result of a natural sedimentation process. Limestone is a type of non-metallic mineral that is used in various sectors, such as in the paint industry, glass industry, plastics, paper industry, liming on agricultural land and is also used in the metal smelting industry. Limestone products produced by PT. Sugih Alamanugroho is in the form of calcium carbonate flour (powder) with sizes of 800 and 1,200 mesh. Before being marketed, calcium flour will go through a series of quality analysis processes to determine moisture content, degree of whiteness and residual weight (+800 mesh). The water content test was analyzed using an infrared moisture determination balance tool, aiming to find out what percentage of the water content contained in limestone and calcium carbonate flour. The degree of whiteness was analyzed using a reflectometer. Residual testing was carried out by weight pf the residue after the drying process was carried out in the oven. Based on the data, the calcium carbonate flour produced has passed the quality test, with a moisture content <0.03%, a whiteness degree >89.6% and a residual weight (+800 mesh) <0.05% in accordance with the quality standards of limestone and calcium flour. carbonates that have been determined by the company. So that the packaging and marketing process can then be carried out.
Keywords: Limestone, Calcium Carbonate Flour, Moisture, Whiteness, Residue Weight
References
Boggs, Sam. (2006). Principles of sedimentology and stratigraphy (4th ed.). Upper Saddle River, N.J.: Pearson Prentice Hall. pp. 177, 181. ISBN 0131547283.
Boynton S. Robert. (1999). ”Chemistry and Technology of Lime and Limestone”, 2nd.ed., John Willey and Sons, Inc.,
Humbarsono, AY, dan Maskuri, Firdaus. (2012). “Pemanfaatan BatuGamping Untuk Bahan Baku Marmer Sintetis Di Daerah Ponjong Gunung Kidul Derah Istimewah Yogyakarta” In Prosiding Seminar Nasional Kebumian 2011 Pengembangan IPTEK Kebumian untuk Menunjang Pembangunan Insani yang Berkelanjutan. pp. 28-42.
Jianwei Sun, Zhonghui Chen. (2018). “Influences of limestone powder on the resistance of concretes to the chloride ion penetration and sulfate attack”, Powder Technology, Vol 338, pp. 725-733, Oct.
Laraebi, Galid. 2017. Karakteristik Kandungan Mineral dan Unsur Peyusun batugamping pada PT. Semen Tonasa. UIN Alauddin.
Margareta, Mailinda Ayu Hana, dkk. (2015). “Sintesa Hydroxyapatite (Ca10(PO₄)₆(OH)₂) Berbasis Batu Kapur”. Jurnal Penelitian Fisika dan Aplikasinya (JPFA), Vol 5 No 1.
Putra, Randa Septian, & Rusli HAR. (2020). “Kajian Teknik Dan Nilai Ekonomi Pengolahan Batu Kapur Pada Pertambangan Batu Kapur Rakyat Bukit Tui, Padang Panjang, Sumatera Barat”. Jurnal Bina Tambang, Vol. 5, No. 2.
Silamma, Renaldo. 2017. Laporan Resmi Ekskursi Tambang Di Yogyakarta, Jawa Tengah dan Jawa Timur. Institut Teknologi Nasional Yogyakarta
Sukandarrumidi. 2018. Bahan Galian Industri. Gajah Mada University Press.
Wahab,Gaber M.A. (2018). “Characterizations of El Minia limestone for manufacturing paper filler and coating”, Egyptian Journal of Petroleum, Vol. 27 (4), pp. 437-443, Dec.
Downloads
Published
Issue
Section
License
Authors who publish in Journal of Metallurgical Engineering and Processing Technology agree to the following terms:
Authors who publish articles in this journal agree to the following terms:
- Copyright remains with the author and gives rights to the Journal of Metallurgical Engineering and Processing Technology as the priority to publish the article with an Creative Commons Atribusi 4.0 Internasional License, which allows the article to be shared with acknowledgment of the author of the article and this journal as the place of publication.
- Authors can distribute the publication of their articles on a non-exclusive basis (for example: on university repositories or books) with notification or acknowledgment of publication in the journal Option
- Authors are allowed to post their work online (for example: on personal websites or in university repositories) before and after the submission process (see The Effect of Open Access)
Journal of Metallurgical Engineering and Processing Technology is licensed under a Creative Commons Atribusi 4.0 Internasional License.