Analysis of Penetrant Test Results of S355J2 Steel Welding Connections for Qualification Welding

Irsyadi Farhan Efriandi

Abstract


NDT (Non Destructive Test) is a form of testing perfomed on materials or objects without causing permanent damage to the material or objects. NDT can be used for testing materials such as concrete, steel, iron, and other. This journal aims to determine the Penetrant Test testing process on S355J2 steel welding results to determine the qualifications of GMAW Welders. Welding testing by a certified welder using GMAW welding. NDT testing was conducted in the form of a visual test and a Penetrant test when testing the weld results. The obtained data showed the welder PT. INKA is qualified with the terms and standards that have been set by the company, namely AWS D1.1 and ASTME E 165. Therefore, the Welder can be involved in the current project.

Keywords


S355J2, WPQR, AWS D1.1, ASTM E 165, GMAW Welding, Physical Metallurgy

Full Text:

PDF

References


A. Ibrahim, S. A. M. A. A. and A. G. (2012). The Effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters. Procedia Eng, 41, 1502–1506.

Abadi, C. S. , R. & A. I. (2019). Analisa Kekuatan Welding Repair Baja AISI 420 dengan Metoda GMAW. Politeknologi, 18.

Abi Sodik, A., Mufarida, N. A., & Kosjoko, K. (2019). Pengaruh penerapan WPS (welding procedure specification) Al 6005 tipe butt joint terhadap kekuatan sambungan las Al 6061. J-Proteksion: Jurnal Kajian Ilmiah Dan Teknologi Teknik Mesin, 3(2), 1–10.

Alfian Wahyu Prasetya. (2017). Pengaruh Debit Gas Pelindung Dan Tegangan Listrik Terhadap Tingkat Kekerasan Dan Struktur Mikro Sambungan Las Gmaw Pada Baja Karbon Sedang Ems-45. Semarang.

Alip, M. (1989). Teori dan Praktik Las.

Amalia, Y., & Rahmatillah, S. (2022). Analisis Sambungan Las Baja S355 J2 Sebagai Penyusun Welding Procedure Specification di PT Industri Kereta Api. JUSTER: Jurnal Sains Dan Terapan, 1(2), 1–6.

Endramawan, T., Haris, E., Dionisius, F., & Prinka, Y. (2017). Aplikasi Non Destructive Test Penetrant Testing (Ndt-Pt) Untuk Analisis Hasil Pengelasan Smaw 3g Butt Joint. JTT (Jurnal Teknologi Terapan), 3(2).

G. Kedarnath, K. P. (2017). Fatigue Surface crack detection by using fluorescent dye penetrant test technique on Welded engineering service components. (IRJET).

Karadeniz, E., Ozsarac, U., & Yildiz, C. (2007). The effect of process parameters on penetration in gas metal arc welding processes. Materials & Design, 28(2), 649–656.

Kholis, I. (2012). Kualifikasi welding procedure specification (WPS) dan juru las (welder) berdasarkan asme section IX di industri migas. Swara Patra: Majalah Ilmiah PPSDM Migas, 2(3).

Khotasa, S. (2016). analisa pengaruh variasi arus dan bentuk kampuh pada pengelasan smaw terhadap kekuatan impact sambungan butt joint pada plat baja a36. Fakultas Teknologi Kelautan Institut Teknologi Sepuluh Nopember Surabaya.

Mujiyanto, Tantok. (2008). Analisis Hasil Pengelasan GMAW Dengan Jenis Ekeltroda ER70S6 di PT INKA Madiun.

Mvola, B., & Kah, P. (2017). Effects of shielding gas control: welded joint properties in GMAW process optimization. The International Journal of Advanced Manufacturing Technology, 88, 2369–2387.

Patil, N. R., & Patil, J. R. (2008). Non Destructive Testing (NDT) advantages and limitations. National Conference on Emerging Trends in Engineering & Technology, At Kopargaon, Maharashtra, India.

Prasetya, A. W., Rusiyanto, R., & Pramono, P. (2017). Pengaruh debit gas pelindung dan tegangan listrik terhadap tingkat kekerasan dan struktur mikro sambungan las GMAW pada baja karbon sedang EMS-45. Jurnal Kompetensi Teknik, 9(2), 42–52.

Rahmatika, A., Sutarto, E., & Arifin, A. C. (2021). Pengujian merusak pada kualifikasi prosedur las plat baja karbon SA-36 dengan proses pengelasan SMAW berdasarkan standar ASME section IX. Jurnal Vokasi Teknologi Industri (Jvti), 3(1).

Siagian, P. J. H., Arifin, N. L., Ulfah, N., & Widiastuti, H. (2022). Inspeksi Hasil Sambungan Pengelasan SMAW pada Pembuatan Frame Acid Skid dengan Metode Liquid Penetrant Testing. Jurnal Teknologi Dan Riset Terapan (JATRA), 4(1), 28–33.

Sri, W. (2013). Welding Inspection. Mitra Wacana Media.

Suwahyo. (2011). Mengelas Dengan Proses Las Busur Listrik Manual. PT. Pustaka Insan Madani.

Thoriq, M. (2015). Modul Praktek Kualifikasi Las. Surabaya: Politeknik Perkapalan Negeri Surabaya.




DOI: https://doi.org/10.31315/jmept.v4i1.7869

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 


 



Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats