Analysis of Penetrant Test Results of S355J2 Steel Welding Connections for Qualification Welding

Authors

  • Irsyadi Farhan Efriandi Universitas Pembangunan Nasional "Veteran" Yogyakarta

DOI:

https://doi.org/10.31315/jmept.v4i1.7869

Keywords:

S355J2, WPQR, AWS D1.1, ASTM E 165, GMAW Welding, Physical Metallurgy

Abstract

NDT (Non Destructive Test) is a form of testing perfomed on materials or objects without causing permanent damage to the material or objects. NDT can be used for testing materials such as concrete, steel, iron, and other. This journal aims to determine the Penetrant Test testing process on S355J2 steel welding results to determine the qualifications of GMAW Welders. Welding testing by a certified welder using GMAW welding. NDT testing was conducted in the form of a visual test and a Penetrant test when testing the weld results. The obtained data showed the welder PT. INKA is qualified with the terms and standards that have been set by the company, namely AWS D1.1 and ASTME E 165. Therefore, the Welder can be involved in the current project.

References

A. Ibrahim, S. A. M. A. A. and A. G. (2012). The Effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters. Procedia Eng, 41, 1502–1506.

Abadi, C. S. , R. & A. I. (2019). Analisa Kekuatan Welding Repair Baja AISI 420 dengan Metoda GMAW. Politeknologi, 18.

Abi Sodik, A., Mufarida, N. A., & Kosjoko, K. (2019). Pengaruh penerapan WPS (welding procedure specification) Al 6005 tipe butt joint terhadap kekuatan sambungan las Al 6061. J-Proteksion: Jurnal Kajian Ilmiah Dan Teknologi Teknik Mesin, 3(2), 1–10.

Alfian Wahyu Prasetya. (2017). Pengaruh Debit Gas Pelindung Dan Tegangan Listrik Terhadap Tingkat Kekerasan Dan Struktur Mikro Sambungan Las Gmaw Pada Baja Karbon Sedang Ems-45. Semarang.

Alip, M. (1989). Teori dan Praktik Las.

Amalia, Y., & Rahmatillah, S. (2022). Analisis Sambungan Las Baja S355 J2 Sebagai Penyusun Welding Procedure Specification di PT Industri Kereta Api. JUSTER: Jurnal Sains Dan Terapan, 1(2), 1–6.

Endramawan, T., Haris, E., Dionisius, F., & Prinka, Y. (2017). Aplikasi Non Destructive Test Penetrant Testing (Ndt-Pt) Untuk Analisis Hasil Pengelasan Smaw 3g Butt Joint. JTT (Jurnal Teknologi Terapan), 3(2).

G. Kedarnath, K. P. (2017). Fatigue Surface crack detection by using fluorescent dye penetrant test technique on Welded engineering service components. (IRJET).

Karadeniz, E., Ozsarac, U., & Yildiz, C. (2007). The effect of process parameters on penetration in gas metal arc welding processes. Materials & Design, 28(2), 649–656.

Kholis, I. (2012). Kualifikasi welding procedure specification (WPS) dan juru las (welder) berdasarkan asme section IX di industri migas. Swara Patra: Majalah Ilmiah PPSDM Migas, 2(3).

Khotasa, S. (2016). analisa pengaruh variasi arus dan bentuk kampuh pada pengelasan smaw terhadap kekuatan impact sambungan butt joint pada plat baja a36. Fakultas Teknologi Kelautan Institut Teknologi Sepuluh Nopember Surabaya.

Mujiyanto, Tantok. (2008). Analisis Hasil Pengelasan GMAW Dengan Jenis Ekeltroda ER70S6 di PT INKA Madiun.

Mvola, B., & Kah, P. (2017). Effects of shielding gas control: welded joint properties in GMAW process optimization. The International Journal of Advanced Manufacturing Technology, 88, 2369–2387.

Patil, N. R., & Patil, J. R. (2008). Non Destructive Testing (NDT) advantages and limitations. National Conference on Emerging Trends in Engineering & Technology, At Kopargaon, Maharashtra, India.

Prasetya, A. W., Rusiyanto, R., & Pramono, P. (2017). Pengaruh debit gas pelindung dan tegangan listrik terhadap tingkat kekerasan dan struktur mikro sambungan las GMAW pada baja karbon sedang EMS-45. Jurnal Kompetensi Teknik, 9(2), 42–52.

Rahmatika, A., Sutarto, E., & Arifin, A. C. (2021). Pengujian merusak pada kualifikasi prosedur las plat baja karbon SA-36 dengan proses pengelasan SMAW berdasarkan standar ASME section IX. Jurnal Vokasi Teknologi Industri (Jvti), 3(1).

Siagian, P. J. H., Arifin, N. L., Ulfah, N., & Widiastuti, H. (2022). Inspeksi Hasil Sambungan Pengelasan SMAW pada Pembuatan Frame Acid Skid dengan Metode Liquid Penetrant Testing. Jurnal Teknologi Dan Riset Terapan (JATRA), 4(1), 28–33.

Sri, W. (2013). Welding Inspection. Mitra Wacana Media.

Suwahyo. (2011). Mengelas Dengan Proses Las Busur Listrik Manual. PT. Pustaka Insan Madani.

Thoriq, M. (2015). Modul Praktek Kualifikasi Las. Surabaya: Politeknik Perkapalan Negeri Surabaya.

Downloads

Published

2023-08-23

Issue

Vol 4, No 1 (August 2023)

Section

Articles

License

Authors who publish in Journal of Metallurgical Engineering and Processing Technology agree to the following terms:

  1. Authors who publish articles in this journal agree to the following terms:

    1. Copyright remains with the author and gives rights to the Journal of Metallurgical Engineering and Processing Technology as the priority to publish the article with an Creative Commons Atribusi 4.0 Internasional License, which allows the article to be shared with acknowledgment of the author of the article and this journal as the place of publication.
    2. Authors can distribute the publication of their articles on a non-exclusive basis (for example: on university repositories or books) with notification or acknowledgment of publication in the journal Option
    3. Authors are allowed to post their work online (for example: on personal websites or in university repositories) before and after the submission process (see The Effect of Open Access)

    Journal of Metallurgical Engineering and Processing Technology is licensed under a Creative Commons Atribusi 4.0 Internasional License.