Selectivity of Leaching From Kulonprogo’s Lowgrade Manganese Ore with Organic Acid : Oxalic Acid, Acetic Acid and Citric Acid

Authors

  • Rima Dewi Anggraeni Sustainable Mineral Processing Research Group Department of Chemical Engineering, Universitas Gadjah Mada 55281 Yogyakarta, Indonesia
  • Agus Prasetya Sustainable Mineral Processing Research Group Department of Chemical Engineering, Universitas Gadjah Mada 55281 Yogyakarta, Indonesia
  • Rochim Bakti Cahyono Sustainable Mineral Processing Research Group Department of Chemical Engineering, Universitas Gadjah Mada 55281 Yogyakarta, Indonesia

Keywords:

Leaching, Lowgrade Manganese ore, Organic Acid, Selectivity

Abstract

Manganese is one of important metal for many sector of many industries such as steel industries, chemical industries, battery industry and many other. Natural resources of manganese ore are decrease in order that many industries try to take manganese from lowgrade manganese ore but they cannot find the effective procedure. Leaching is a hydrometallurgical process which is an effective metal extraction from low grade metal sources with low processing cost and relatively low pollutants in order that solvent which used in this study was organic acid to reduce pollutants of this process. In this study, selectivity from leaching result from kulonprogo’s lowgrade manganese ore with organic acid such as oxalic acid, acetic acid and citric acid were investigated. It was determined that acetic acid was more selective with mangan metal about 76,08 % than other acid whereas oxalic acid was more selective with iron metal about 43,21 % than other acid whereas citric acid was more selective with calcium metal than other acid about 54,96 %. This study in same condition operation such as pH, Temperature, particle size, solid-liquid ratio and stirring speed.

               

Downloads

Published

2018-07-04

Issue

2018: PROSIDING SNTKK 2018

Section

Articles

License

Syarat yang harus dipenuhi oleh Penulis sebagai berikut:

  • Penulis menyimpan hak cipta dan memberikan jurnal hak penerbitan pertama naskah secara simultan dengan lisensi di bawah Creative Commons Attribution License yang mengizinkan orang lain untuk berbagi pekerjaan dengan sebuah pernyataan kepenulisan pekerjaan dan penerbitan awal di jurnal ini.
  • Penulis bisa memasukkan ke dalam penyusunan kontraktual tambahan terpisah untuk distribusi non ekslusif versi kaya terbitan jurnal (contoh: mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan penerbitan awalnya di jurnal ini.
  • Penulis diizinkan dan didorong untuk mem-posting karya mereka online (contoh: di repositori institusional atau di website mereka) sebelum dan selama proses penyerahan, karena dapat mengarahkan ke pertukaran produktif, seperti halnya sitiran yang lebih awal dan lebih hebat dari karya yang diterbitkan. (Lihat Efek Akses Terbuka).