Teknologi Pengolahan Limbah Cair Batik dengan IPAL BBKB Sebagai Salah Satu Alternatif Percontohan bagi Industri Batik

Lilin Indrayani

Abstract


The increase in production from the batik industry, in addition to providing a positive influence on people's welfare, also has a negative impact. One of the negative impacts is the increase in wastewater which has a relatively high BOD and COD characteristic. Most of the batik IKMs dispose of their waste directly into the environment without any prior processing. While all this time the effectiveness of WWTP owned by several batik IKMs is still often doubted by various parties. Based on these conditions, it is necessary to pilot an effective wastewater treatment plant from Small and Midle Industry (SMI) batik. Through this paper a scheme was introduced in the Waste Water Treatment Plant (WWTP) for batik waste owned by the Center for Crafts and Batik (BBKB) which can be used as a model for batik IKM. The treatment process in the BBKB WWTP is through various stages, namely physics, chemistry, and biology through the process of sedimentation, coagulation and flocculation, and anaerobic filters. In this paper, it is also explained about (1) the characteristics and results of measurements of pollutant concentration in the liquid waste of the batik industry, (2) examining the influence of physical, chemical and biological management of batik waste on decreasing pollutant parameters. The tests were carried out in accredited environmental laboratories using standards for the quality and quantity of the batik industrial wastewater adapted to DIY Regional Regulation Number 7 of 2016 concerning waste water quality standards for the batik industry.From the results of testing on the stages of management carried out at WWTP BBKB shows that each treatment process can reduce the concentration of pollutant levels. The overall value of the parameters from the test results on the waste sample at the final stage before being discharged into the environment below the threshold value of environmental quality standards so that it can be stated that batik waste from the processing of BBKB WWTP is safe for disposal into the environment.


Keywords


management of batik IKM wastewater, treatment phase and BBKB WWTP

References


Ginting, Perdana. 2007. Sistem Pengelolaan Lingkungan Dan Limbah Industri Ms.Cv Yrama Widya. Hal 17-18. Jakarta.

Junaidi, dkk. Analisis Teknologi Pengolahan Limbah Cair Pada Industri Tekstil (Studi Kasus Pt. Iskandar Indah Printing Textile Surakarta).

Muljadi. 2009. Efisiensi Instalasi Pengolahan Limbah Cair Industri Batik Cetak Dengan Metode Fisika-Kimia Dan Biologi Terhadap Penurunan Parameter Pencemar (Bod, Cod, Dan Logam Berat Krom (Cr) (Studi Kasus Di Desa Butulan Makam Haji Sukoharjo) Vol. 8. No. 1. 8 Januari 2009 : 7–16. Program Studi Ilmu Lingkungan Pasca Sarjana Universitas Sebelas Maret Surakarta.

Suryo, Anandriyo. 2013. Menuju Pengelolaan Sungai Bersih Di Kawasan Industri Batik Yang Padat Limbah Cair (Studi Empiris: Watershed Sungai Pekalongan Di Kota Pekalongan) Fakultas Ekonomika dan Bisnis Universitas Diponegoro Semarang.

Sugiyanto, Darussalam, M. & Nurhidayat N. 1991. Pemanfaatan Gulma Air untuk Menanggulangi Pencemaran Limbah Aktif Cr-51. Makalah disajikan pada Proceedings Seminar Reaktor Nuklir dalam Penelitian Sains dan Teknologi menuju Era Tinggal Landas, Bandung, 8-10 Oktober 1991.


Refbacks

  • There are currently no refbacks.