PENINGKATAN KOMPETENSI GAMBAR TEKNIK DOSEN VOKASI MELALUI SERTIFIKASI CERTIFIED SOLIDWORKS ASSOCIATE (CSWA)
Keywords:
vocational lecturer competencies, solidworks certification, technical competency development, cswa training, industrial designAbstract
The development of technical drawing competencies for vocational lecturers is an urgent need in meeting the increasingly complex demands of the industry, particularly in the use of design software such as SolidWorks. This development program is supported by the Ministry of Education and Culture through the Vocational Lecturer Competency Development Program (NDPKD), which offers training and certification for the Certified SolidWorks Associate (CSWA). The training was held at the Surabaya State Shipbuilding Polytechnic and involved 20 lecturers from various polytechnics across Indonesia. The program spanned four days and concluded with an international certification exam on the fifth day. The implementation method included simulations, hands-on practice in part and assembly creation, and the CSWA competency test. Training results demonstrated that all participants successfully obtained certification, achieving scores ranging from 175 to 240, highlighting the program’s effectiveness in enhancing lecturers’ competencies. This success not only provides professional recognition for the lecturers but also boosts confidence in applying these skills within classroom instruction. The CSWA training serves as a significant solution for lecturers to integrate technical design skills aligned with industry standards and drive improvements in the university's Key Performance Indicators (KPIs).
References
Abdillah, H., Nurtanto, M., Prasetyo, A., Puspito, J., & Ikhsanudin. (2023). Optimization of DLP 3D printing parameters on casting pattern manufacturing process. AIP Conference Proceedings, 2671(020019), 1–7. https://doi.org/10.1063/5.0114300
Abdullah, S., Caturwati, N. K., Satria, D., Dwinanto, D., Susilo, S., Haryadi, H., Wahyudi, H., Pinem, M. P., & Suprayogi, D. T. (2023). Improving the 2D drawing soft skills of Banten Province vocational high school teachers and laboratory assistants through workshops and training. Journal of Community Service in Science and Engineering (JoCSE), 2(2), 73. https://doi.org/10.36055/jocse.v2i2.22394
Adegbenro, D. D. R., Shefiu, D. O., Oyenike, D. (Mrs) O. R., & Adetunji, A. B. (2023). Impact and Utilization of Instructional Materials in Enhancing Effective Teaching of Technical Drawing in Senior Secondary Schools in Education District V Zone III in Lagos State. International Journal of Research and Scientific Innovation, X(VI), 121–126. https://doi.org/10.51244/ijrsi.2023.10613
Andersen, J. H., Tjørnhøj-Thomsen, T., Reventlow, S., & Davidsen, A. S. (2020). Being Heard and Remembered: Young Adults’ Experiences of Recognition in the Social and Health Care Systems in Denmark. Ethos, 48(4), 459–476. https://doi.org/https://doi.org/10.1111/etho.12291
Azzam, N., Khamis, N., Almadi, M., Batwa, F., Alsohaibani, F., Aljebreen, A., Alharbi, A., Alaska, Y., Alameel, T., Irving, P., & Satava, R. M. (2020). Development and validation of metric-based-training to proficiency simulation curriculum for upper gastrointestinal endoscopy using a novel assessment checklist. Saudi Journal of Gastroenterology, 26(4). https://journals.lww.com/sjga/fulltext/2020/26040/development_and_validation_of.3.aspx
Campanario, S. C., Bikos, L. H., & Kendall, D. L. (2020). Ignatian Spirituality and Career Development: New Evidence for Age-Old Practices. Journal of Career Development, 49(3), 647–665. https://doi.org/10.1177/0894845320957086
Cecotti, H., Boumedine, C., & Callaghan, M. (2017). Hand-Drawn Symbol Recognition in Immersive Virtual Reality Using Deep Extreme Learning Machines BT - Recent Trends in Image Processing and Pattern Recognition (K. C. Santosh, M. Hangarge, V. Bevilacqua, & A. Negi (eds.); pp. 80–92). Springer Singapore.
Celume, M.-P., & Korda, H. (2022). Three decades of interventions for the unemployed – review of practices between 1990 and 2020 and their effects on (re) employment competencies. Education + Training, 64(2), 230–243. https://doi.org/10.1108/ET-02-2021-0053
Davis, B., & Dunn, R. (2019). Professional identity in the infant room. Australasian Journal of Early Childhood, 44(3), 244–256. https://doi.org/10.1177/1836939119855222
Desselle, S. P., Hohmeier, K. C., & McKeirnan, K. C. (2019). The Value and Potential Integration of Pharmacy Technician National Certification into Processes That Help Assure a Competent Workforce. Pharmacy, 7(4), 147. https://doi.org/10.3390/pharmacy7040147
Friesen, M. R., & Cicek, J. S. (2017). Internationality-Edicated Engineers’ Insights into the Social Responsibilities Embeded in the Canadian Engineering Profession. Proc. 2017 Canadian Engineering Education Association (CEEA17) Conf, 1–6.
Gallagher, A. G., O’Sullivan, G. C., & O’Sullivan, G. C. (2012). Metric-Based Training to Proficiency: What Is It and How Is It Done? BT - Fundamentals of Surgical Simulation: Principles and Practice (A. G. Gallagher & G. C. O’Sullivan (eds.); pp. 213–240). Springer London. https://doi.org/10.1007/978-0-85729-763-1_8
Haasler, S. R. (2020). The German system of vocational education and training: challenges of gender, academisation and the integration of low-achieving youth. Transfer: European Review of Labour and Research, 26(1), 57–71. https://doi.org/10.1177/1024258919898115
Haryanto, Kusuma, W. M., Mutohhari, F., Nurtanto, M., & Suyitno, S. (2021). Innovation Media Learning: Online Project-Based Learning (O-PBL) on Drawing Competence in Automotive Engineering Using Video on YouTube. Journal of Physics: Conference Series, 2111(1). https://doi.org/10.1088/1742-6596/2111/1/012020
Ikechukwu Oguejiofor, V., Nwachkwu Ogbonna, G., Nkechi Imakwu, V., Anthony Ezeama, O., & Okorie Eze, O. (2021). Differential Effect of Prior Knowledge of Manual Technical Drawing on Academic Achievement of South-East, Nigeria Colleges of Education (Technical) Students in AutoCAD. American Journal of Mechanical and Industrial Engineering, 6(6), 90. https://doi.org/10.11648/j.ajmie.20210606.12
Liwiński, J. (2020). The Impact of Compulsory Schooling on Hourly Wage: Evidence From the 1999 Education Reform in Poland. Evaluation Review, 44(5–6), 437–470. https://doi.org/10.1177/0193841X20987104
Munastiwi, E. (2015). The Management Model of Vocational Education Quality Assurance Using ‘Holistic Skills Education (Holsked).’ Procedia - Social and Behavioral Sciences, 204(November 2014), 218–230. https://doi.org/10.1016/j.sbspro.2015.08.144
Mutohhari, F., Sudira, P., & Nurtanto, M. (2021). Automotive Engineering Drawing Learning: Effective Online Learning Using Autocad Application. Journal of Education Technology, 5(2), 214–219. https://doi.org/10.23887/jet.v5i2.33197
Nurlaela, L., Wibawa, S. C., Handajani, S., Wahini, M., Miranti, M. G., & Romadhoni, I. F. (2019). Preparing Competitive Graduates of Vocational School through Revitalization Program. 1st International Conference on Education, Social Sciences and Humanities (ICESSHum 2019), 335(ICESSHum), 376–381. https://doi.org/10.2991/icesshum-19.2019.61
Nurtanto, M., Sofyan, H., & Pardjono, P. (2021). E-learning based autocad 3d interactive multimedia on vocational education (Ve) learning. Journal of Engineering Education Transformations, 34(4), 97–103. https://doi.org/10.16920/jeet/2021/v34i4/155014
Rahimi, S., & Shute, V. J. (2021). First inspire, then instruct to improve students’ creativity. Computers & Education, 174, 104312. https://doi.org/https://doi.org/10.1016/j.compedu.2021.104312
Ray, S. M., Galvan, O., & Zarestky, J. (2018). Gender-Inclusive Educational Programs for Workforce Development. Adult Learning, 29(3), 94–103. https://doi.org/10.1177/1045159518759733
Samidjo, S. (2019). Retooling For Terminated Contract Workers Of Vocational School Alumni (Back) To Work. Taman Vokasi, 7(2), 168. https://doi.org/10.30738/jtv.v7i2.6317
Sanchez, D. T., Peconcillo Jr., L. B., Wong, R. L., Peteros, E. D., & Godinez, J. A. T. (2020). Assessing Technical Drawing Proficiency in the Strengthened Technical Vocational-Education Program (STVEP). Universal Journal of Educational Research, 8(12A), 7282–7295. https://doi.org/10.13189/ujer.2020.082511
Schmid, M. J., Örencik, M., Schmid, J., & Conzelmann, A. (2022). Linking sports-related and socio-economic resources of retiring Olympic athletes to their subsequent vocational career. International Review for the Sociology of Sport, 58(5), 809–828. https://doi.org/10.1177/10126902221123881
Setiyawami, Sugiyo, Sugiyono, & Rahardjo, T. J. (2020). The Role of Vocational Education on the Advancement of Human Development in Indonesia. International Conference on Science and Education and Technology (ISET 2019) The, 443(Iset 2019), 406–410. https://doi.org/10.2991/assehr.k.200620.079
Venkatesh, K., Reddy, S. K., & Angothu, H. (2023). Vocational skill training programs for persons with intellectual disability (PID) and trainers’ perspective during and post vocational skill training. Journal of Family Medicine and Primary Care, 12(12). https://journals.lww.com/jfmpc/fulltext/2023/12120/vocational_skill_training_programs_for_persons.22.aspx
Wajdi, F., & Kusmasari, W. (2023). Training in Fundamentals of Standard Technical Drawing at SMK Muhammadiyah Tirtayasa. ETHOS: Jurnal Penelitian Dan Pengabdian Kepada Masyarakat, 11(2), 155–164. https://doi.org/10.29313/ethos.v11i2.10924
Wibisono, G., Wijanarka, B. S., & Theophile, H. (2020). The Link and Match between the Competency of Vocational High Schools Graduates and the Industry on CAD/ CAM and CNC. Jurnal Pendidikan Teknologi Dan Kejuruan, 26(1), 26–34. https://doi.org/10.21831/jptk.v26i1.27932
Yoto, Y. (2018). Production-Based Curriculum Development in Vocational High Schools for Preparing Skilled Labor in Industry. International Conference on Indonesian Technical Vocational Education and Association (APTEKINDO 2018), 201, 173–176. https://doi.org/10.2991/aptekindo-18.2018.38
Zhu, Y., Liu, H., & Ding, W. (2023). Research on the Construction of Core System of Credit Bank in Vocational Education. Advances in Education, Humanities and Social Science Research, 4(1), 223. https://doi.org/10.56028/aehssr.4.1.223.2023
Additional Files
Published
Issue
Section
License
Copyright (c) 2025 Dharma: Jurnal Pengabdian Masyarakat
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
