FEED ZONE CHARACTERIZATION BASED ON PTS FLOWING DATA AND GEOLOGICAL DATA OF WELL DRILLING A FIELD B
DOI:
https://doi.org/10.31315/jpgt.v5i2.13044Abstract
Kamojang Geothermal is an active production field owned by PT Pertamina Geothermal Energy that contains 1 steam-phase fluid. This field often conducts production tests, one of which is the PTS flow test. This study aims to determine the relationship between the potential size of the feed zone and mineralogy. This research method begins with calculating and analyzing the flowing PTS. After the PTS calculation is complete, it is continued by making a composite log graph from the drilling geology data. The results show that the characteristics of reservoir mineral rocks are the appearance of epidote minerals and the caprock section is characterized by the appearance of clay minerals. In the reservoir zone, the feed zone was found at a depth of 1300 mMD and 844 mMD with mass rates of 62 t/h and 11.19 t/h, respectively. The distribution of the feed zone was found to contain epidote minerals as much as 1% of 67% of the altered andesite rock at a depth of 844 mMD and epidote minerals as much as 15% of 79% of the altered breccia rock at a depth of 1300 mMD.
References
Akbar. (2017). Analisis Data Pts (Pressure, Temperature, Spinner) Setelah.
Brehme, M., Zurich, E., Blöcher, G., Deon, F., Cacace, M., Moeck, I., Wiegand, B., Kamah, Y., Regenspurg, S., Zimmermann, G., Sauter, M., & Huenges, E. (2016). Characterizing permeability structures in geothermal reservoirs-A case study in Lahendong. https://www.researchgate.net/publication/297860814
Haluk, H. (2014). Pengaruh Permeabilitas Reservoir Terhadap Pembentukan Lapangan Panasbumi.
Hilyah, A., & Utama, W. (2016). Pengaruh Patahan Dan Induksi Seismik Pada Sistem Geothermal Studi Kasus Lapangan Geothermal Kamojang.
Kasbani. (2009). Tipe Sistem Panas Bumi di Indonesia dan Estimasi Potensi Energinya.
Koestono, H., Nusantara, I. M., Thamrin, V. D. M., & Kamah, M. H. (2015). Hydrothermal Alteration Mineralogy of Well HLS-C, Hululais Geothermal Field, Bengkulu, Indonesia. In Proceedings World Geothermal Congress.
Mirawati Makatita, F., Didit Haryanto, A., & Hutabarat, J. (2021). Mineral Alterasi Dan Mineralogi Pada Penampang Bor X Dan Y Di Daerah Cibaliung, Banten.
Naufalia, G., Suyudi, S. E., Indriana, I. N., Kasmungin, S., & Yanti, W. (2018). Penentuan Parameter Reservoir Geothermal Pada Sumu C Lapangan K Menggunakan Pts Survey Dan Gpt. In Seminar Nasional Cendekiawan ke (Vol. 4).
Nenny, I., & Saptadji, M. (2001). Teknik Panas bumi.
Rachmarifqi. (2017). Identifikasi Kondisi Dan Potensi Sumur Berdasarkan Data Pts Sumur X.
Rahmaningrum, A. N. N., & Asrafil, A. (2021). Alterasi Dan Mineralisasi Bijih Pada Batuan Diorit Di Daerah Wombo, Sulawesi Tengah. Jge (Jurnal Geofisika Eksplorasi), 7(2), 138–149. https://doi.org/10.23960/jge.v7i2.136
Ridwan. (2013). Geothermal Capital Overview (Time mineral dan Industrial Institute, Ed.).
Riswandi, H. (2023). Analisis Potensi Panas Bumi Berdasarkan Data Permukaan Daerah Parangtritis, D. I. Yogyakarta.
Robiul Ashari, W., Hendrasto, F.-, Sumotarto, U., Sotha, D., Meirawaty, M., & Wijaya, B. (2022). Analisis Mineral Alterasi Untuk Mengetahui Sistem Panasbumi Daerah Pekasiran dan Sekitarnya, Kecamatan Batur, Kabupaten Banjarnegara, Provinsi Jawa Tengah. Petro:Jurnal Ilmiah Teknik Perminyakan, 11(3), 115–120. https://doi.org/10.25105/petro.v11i3.14399
Steingrímsson, B. (2013). Geothermal Well Logging: Temperature And Pressure Logs. www.kusterco.com
Suharno (2013). Pemanfaatan Hasil-hasil Riset Panasbumi untuk Memperkaya Materi Pembelajaran Fisika. Lampung, Indonesia.
Yanto. (2021). Menyelesaikan Pergeseran Dataset Tekanan, Suhu dan Spinner Menggunakan Geostatistik Metode Data Prediksi : Dalam Kasus Kesalahan Data Alat Tercatat Tunggal. https://www.researchgate.net/publication/372492810
