Gold Extraction Process with Pre-Ox Sample and Aachen Assisted Leaching (AAL) using Running Aachen
DOI:
https://doi.org/10.31315/jmept.v4i2.11252Keywords:
Minerals, Aachen, Leaching, Extractive MetallurgyAbstract
The Center for Mineral and Coal Testing is an institution that works in the field of research services on mining and mineral processing. In the mineral processing research currently being carried out there is a research project related to increasing the efficiency of the leaching process using the Aachen Reactor. The samples used in this research were refractory gold samples. The problem of reducing the effectiveness of gold leaching is that there are minerals that are still included in the associated minerals, therefore a pre-treatment process is needed to remove these associated minerals. The Aachen reactor will help increase the efficiency of the leaching process by increasing Dissolve Oxygen levels to 30 ppm. In this study, two samples were used for comparison, namely the Pre-Ox sample and the Aachen Assisted Leaching (AAL) sample.
References
Fajri, Dwi Latifatul. (2022). 6 Daerah Penghasil Tambang Emas Terbesar di Indonesia
Jimansyah. (2016). Ekstraksi Logam Emas dan Perak dari Larutan Bijih dengan Sistem Penyerapan Menggunaan Karbon Aktif Batubara Sub-Bituminus (Coalite). Universitas Islam Bandung: Jawa Barat
Maelgwyn, (2009). Imhoflot Pneumatic Flotation Technology
Nastiti, Hani. (2022). Pengertian Emas, Jenis, Manfaat, dan Cara Membedakan Emas Asli.
Prokhorov, Konstantin. (2018). Influence Of Agitation Leaching Conditions to The Behavior Of Gold in Solution. Mining Institute of Far Branch of Russin Academy Of Sciences: Russia
P. Lotz, J. van der Merwe dkk. (2015) Aachen ReactorsTM, a proven system to realize hidden economic potentials, The Southern African Institute of Mining and Metallurgy Word Gold Conference 2015.
Reza, Muhammad. (2022). Kajian Teknis Pengolahan Emas Menggunakan Metode Heap Leaching di PT DEF Kecamatan Simpenan, Kabupaten Sukabumi, Provinsi Jawa Barat. Bandung Conference Series Mining Engineering: Jawa Barat
Riandini, Ananda. (2023) ANALISISI KESTABILAN HEAP LEACH PAD BERDASARKAN JUMLAH MATERIAL YANG DAPAT DITAMPUNG PADA PROJEK TAMBANG XX, JAWA BARAT. Universitas Islam Negeri Syarif Hidayatullah: Jakarta
Rindu, Maharani. (20170. Perbandingan Hasil Logam Emas pada Pengolahan Bijih Emas dengan Metode Sianida (Heap Leaching) Berdasarkan Perbedaan Ukuran Butir Umpan. UPN “Veteran” Yogyakarta
Sabara, Zakir, dkk. (2017). EKSTRAKSI EMAS DARI BIJI EMAS DENGAN SIANIDA DAN OKSIGEN DENGAN METODE EKSTRAKSI PADAT-CAIR. Journal Of Chemical Process Engineering. Vol. 02, No. 02. Universitas Muslim Indonesia: Makassar
Sarempa, apriani dkk. (2017) OPTIMASI RECOVERY EMAS DAN PERAK DENGAN SIANIDASI PADA DEPOSIT BIJIH EMAS KADAR RENDAH DI PT. NUSA HALMAHERA MINERAL DAERAH GOSOWONG KABUPATEN HALMAHERA UTARA, PROVINSI MALUKU UTARA
Suci, Ferlia. (2016). Efektifitas Larutan Leaching Tiourea dan Tiosulfat dengan Bantuan Oksidator dalam Proses Ekstraksi Emas (Au).Universitas Jember: Jawa Timur
Sudesno, Nurhakim. (2019). Peningkatan Recovery Emas di Carbon in Leach Plant PT. Antam tbk. Unit Bisnis Pertambangan Emas Pongkor, Jawa Barat (Studi Kasus Kadar Bijih 3.5 – 4.5 gp di Plant 1). PROSDIDING TPT XXVIII PERHAPI 2019
Sulistiyono, Eko. (2016). Potensi Pemanfaatan Limbah Pengolahan Emas Proses Heap Leaching. Semninar Nasional Sains dan Teknologi 2016. Universitas Muhammadiyah Jakarta: Jakarta
S. Orgul. U. Atalay. (2002). Reaction Chemistry Of Gold Leaching in Thiourea Solution For A Turkish Gold Ore. Hydrometallurgy, Vol. 67. No. 71-77. Elsevier
Tangkuman, Herling. (2008). Pengaruh Konsentrasi Sianida terhadap Produksi Emas. Universitas Sam Ratulangi: Sulawesi Utara
Tang, Yuan. (2020). Enhancement Of Gold Agitation Leaching by HPGR Comminution Via Microstructural Modification Of Gold Ore Particles. Vol 159. Minerals Engineering. Elsevier
Downloads
Published
Issue
Section
License
Authors who publish in Journal of Metallurgical Engineering and Processing Technology agree to the following terms:
Authors who publish articles in this journal agree to the following terms:
- Copyright remains with the author and gives rights to the Journal of Metallurgical Engineering and Processing Technology as the priority to publish the article with an Creative Commons Atribusi 4.0 Internasional License, which allows the article to be shared with acknowledgment of the author of the article and this journal as the place of publication.
- Authors can distribute the publication of their articles on a non-exclusive basis (for example: on university repositories or books) with notification or acknowledgment of publication in the journal Option
- Authors are allowed to post their work online (for example: on personal websites or in university repositories) before and after the submission process (see The Effect of Open Access)
Journal of Metallurgical Engineering and Processing Technology is licensed under a Creative Commons Atribusi 4.0 Internasional License.