Gold Extraction Process with Base-Case Sample and Aachen Assisted Leaching (AAL) using Running Aachen at The Mineral And Coal Testing Center Tekmira, Bandung Jawa Barat
DOI:
https://doi.org/10.31315/jmept.v4i2.11337Keywords:
Keywords, Minerals, Aachen, LeachingAbstract
The Center for Mineral and Coal Testing is an institution that works in the field of research services on mining and mineral processing. In the mineral processing research currently being carried out there is a research project related to increasing the efficiency of the leaching process using the Aachen Reactor. The samples used in this research were refractory gold samples. The problem of reducing the effectiveness of gold leaching is that there are minerals that are still included in the associated minerals, therefore a pre-treatment process is needed to remove these associated minerals. The Aachen reactor will help increase the efficiency of the leaching process by increasing Dissolve Oxygen levels to 30 ppm. In this study, two samples were used for comparison, namely the Pre-Ox sample and the Aachen Assisted Leaching (AAL) sample.
References
Referensi
Fajri, Dwi Latifatul. 2022. 6 Daerah
Penghasil Tambang Emas Terbesar di Indonesia (diakses dari katadata.co.id pada 20 Agustus 2023)
Maelgwyn, 2009. Imhoflot Pneumatic
Flotation Technology
Nastiti, Hani. Pengertian Emas, Jenis,
Manfaat, dan Cara Membedakan Emas Asli. Tanamduit, 8 Juli 2022, [Online]. Tersedia Pengertian Emas, Jenis, Manfaat, dan Cara Membedakan Emas Asli (tanamduit.com) [Diakses: 20 Agustus 2023]
P. Lotz, J. van der Merwe dkk. Aachen
ReactorsTM, a proven system to realize hidden economic potentials, The Southern African Institute of Mining and Metallurgy Word Gold Conference 2015.
Sarempa, apriani dkk. OPTIMASI
RECOVERY EMAS DAN PERAK DENGAN SIANIDASI PADA DEPOSIT BIJIH EMAS KADAR RENDAH DI PT. NUSA HALMAHERA MINERALS DAERAH GOSOWONG KABUPATEN HALMAHERA UTARA, PROVINSI MALUKU UTARA
Sabara, Zakir. EKSTRAKSI EMAS
DARI BIJIH EMAS DENGAN
SIANIDA DAN OKSIGEN DENGAN METODE EKSTRAKSI PADAT-CAIR. Journal Of Chemical Process Engineering, ISSN = 2303 – 3401, vol. 02, no. 02, Nov -2017
Downloads
Published
Issue
Section
License
Authors who publish in Journal of Metallurgical Engineering and Processing Technology agree to the following terms:
Authors who publish articles in this journal agree to the following terms:
- Copyright remains with the author and gives rights to the Journal of Metallurgical Engineering and Processing Technology as the priority to publish the article with an Creative Commons Atribusi 4.0 Internasional License, which allows the article to be shared with acknowledgment of the author of the article and this journal as the place of publication.
- Authors can distribute the publication of their articles on a non-exclusive basis (for example: on university repositories or books) with notification or acknowledgment of publication in the journal Option
- Authors are allowed to post their work online (for example: on personal websites or in university repositories) before and after the submission process (see The Effect of Open Access)
Journal of Metallurgical Engineering and Processing Technology is licensed under a Creative Commons Atribusi 4.0 Internasional License.