Sintesis dan Karakterisasi Nano-Hidroksiapatit dari Cangkang Rajungan Sebagai Material Pembuatan Filament 3D Printing dengan Kombinasi Poly(caprolactone)

Deden Eko Wiyono, Salma Auliarifkie Siregar, Ummu Zahroh Ma'mun, Maharani Sugito Rosanti, Eva Oktavia Ningrum

Abstract


An orthopedic anchoring rotator cuff is often used to reattach a torn rotator cuff tendon to the bone.  However, anchoring rotator cuffs commonly use non-biodegradable metals and require a second surgery. Furthermore, manufacturing processes for retaining rotator cuff implants are developed using filament-based 3D printing. So that biodegradable and biocompatible materials are needed as filament materials for making anchoring rotator cuffs, one of which is by mixing poly(caprolactone) (PCL) and hydroxyapatite (HAp). In this research, we will synthesize nano-sized HAp from crab shell waste using the precipitation method. The synthesis results will be reviewed through XRF, FTIR, XRD, and SEM analysis. In addition, the mechanical properties of PCL/HAp composite filaments for tissue scaffolds at variables of 9.5:0.5, 9:1, and 8.5:1.5 were also reviewed. XRF characterization results show that the crab shell has a calcium content of 93.09%. FTIR testing shows the formation of hydroxyapatite functional groups, namely OH- and PO43. XRD test results show conformity with the JCPDS 09-0432 graph with a degree of crystallinity of 88.32%. SEM analysis showed that the HAp produced has a nano size with a particle diameter of about 126.3 nm. In mechanical analysis, the best PCL/HAp filaments were obtained at a mixing ratio of (9:1)

Keywords


3D printing filament; Crab shell; Hydroxyapatite; Polycaprolactone

Full Text:

PDF

References


Al Haris, Ahmad Fadli, Silvia Reni YentiAl Haris, Ahmad Fadli, Silvia Reni Yenti. “Sintesis Hidroksiapatit Dari Limbah Tulang Sapi Menggunakan Metode Presipitasi Dengan Variasi Rasio Ca/P Dan Konsentrasi H3PO4.” Journal of the American Chemical Society, vol. 123, no. 10, 2013, pp.

Amnael Orozco-Díaz, C., et al. “Characterization of a Composite Polylactic Acid-Hydroxyapatite 3D-Printing Filament for Bone-Regeneration.” Biomedical Physics & Engineering Express, vol. 6, no. 2, Mar. 2020, p. 025007.

Azis, Yelmida, et al. “Synthesis of Hydroxyapatite by Hydrothermal Method from Cockle Shell (Anadara Granosa).” Journal of Chemical and Pharmaceutical Research, vol. 7, no. 5, 2015, pp. 798–804.

Berzina-Cimdina, Liga, and Natalija Borodajenko. “Research of Calcium Phosphates Using Fourier Transform Infrared Spectroscopy.” Infrared Spectroscopy - Materials Science, Engineering and Technology, InTech, 2012.

Cahyaningrum, Sari, et al. “Synthesis of Hydroxyapatite from Crab Shell (Scylla Serrata) Waste With Different Methods Added Phosphate.” Proceedings of the Seminar Nasional Kimia - National Seminar on Chemistry (SNK 2018), Atlantis Press, 2018.

Cahyaningrum, Sari E., et al. “Synthesis Hydroxyapatite/Collagen/Chitosan Composite as Bone Graft for Bone Fracture Repair.” Proceedings of the International Joint Conference on Science and Engineering (IJCSE 2020), Atlantis Press, 2020.

Cummins, Carolyn L., et al. “In Vivo Modulation of Intestinal CYP3A Metabolism by P-Glycoprotein: Studies Using the Rat Single-Pass Intestinal Perfusion Model.” Journal of Pharmacology and Experimental Therapeutics, vol. 305, no. 1, Apr. 2003, pp. 306–14.

Ding, Wenjiang. “Opportunities and Challenges for the Biodegradable Magnesium Alloys as Next-Generation Biomaterials.” Regenerative Biomaterials, vol. 3, no. 2, Apr. 2016, pp. 79–86.

Farraro, Kathryn F., et al. “Revolutionizing Orthopaedic Biomaterials: The Potential of Biodegradable and Bioresorbable Magnesium-Based Materials for Functional Tissue Engineering.” Journal of Biomechanics, vol. 47, no. 9, June 2014, pp. 1979–86.

Hadiwinata, Bagus, et al. Optimasi Waktu Dan Suhu Kalsinasi Tepung Cangkang Rajungan ( Portunus Sp .) Sebagai Bahan Baku Hidroksiapatit The Optimization of Time and Temperature to Calcine The Crab Shell ( Portunus Sp .) Powder as Raw Material of Hydroxyapatite. 2021, pp. 121–30.

Kubásek, Jiří, et al. “The Effect of Hydroxyapatite Reinforcement and Preparation Methods on the Structure and Mechanical Properties of Mg-HA Composites.” Science and Engineering of Composite Materials, vol. 24, no. 2, Mar. 2017, pp. 297–307.

Kusrini, Eny, et al. “Preparation of Hydroxyapatite from Bovine Bone by Combination Methods of Ultrasonic and Spray Drying.” International Conference on Chemical, Bio-Chemical and Environmental Sciences (ICBEE’2012), no. April 2016, 2012, pp. 47–51.

Lazić, Slavica, et al. “The Effect of Temperature on the Properties of Hydroxyapatite Precipitated from Calcium Hydroxide and Phosphoric Acid.” Thermochimica Acta, vol. 374, no. 1, June 2001, pp. 13–22.

Levingstone, Tanya J., et al. “Plasma Sprayed Hydroxyapatite Coatings: Understanding Process Relationships Using Design of Experiment Analysis.” Surface and Coatings Technology, vol. 283, Dec. 2015, pp. 29–36.

Ningrum, E. O., et al. “Production of Bone Implant Filaments from Blue Crab Shells (Portunus Pelagicus) in Various Synthesis Conditions and Blending Ratios of Hydroxyapatite (HAp)-Polycaprolactone (PCL).” IOP Conference Series: Earth and Environmental Science, vol. 963, no. 1, Jan. 2022, p. 012021.

Park, Hyun-Chul, et al. “Effect of Hydroxyapatite Nanoparticles and Nitrogen Plasma Treatment on Osteoblast Biological Behaviors of 3D-Printed HDPE Scaffold for Bone Tissue Regeneration Applications.” Materials, vol. 15, no. 3, Jan. 2022, p. 827.

Prakasam, M., et al. Hydrothermal Crystal Growth and Applications. 2015, pp. 151–56.

Raya, Indah, et al. “Shynthesis and Characterizations of Calcium Hydroxyapatite Derived from Crabs Shells ( Portunus Pelagicus ) and Its Potency in Safeguard against to Dental Demineralizations.” International Journal of Biomaterials, vol. 2015, 2015, pp. 1–8.

Rizkayanti, Yazida, and Yusril Yusuf. “Optimization of the Temperature Synthesis of Hydroxyapatite from Indonesian Crab Shells.” International Journal of Nanoelectronics and Materials, vol. 12, no. 1, 2019, pp. 85–92.

Rujitanapanich, Sawittree, et al. “Synthesis of Hydroxyapatite from Oyster Shell via Precipitation.” Energy Procedia, vol. 56, 2014, pp. 112–17.

Spargoli, Guido. “Supraspinatus Tendon Pathomechanics: A Current Concepts Review.” International Journal of Sports Physical Therapy, vol. 13, no. 6, Dec. 2018, pp. 1083–94.

Taji, Lulu Sekar, et al. “Hydroxyapatite Based Material: Natural Resources, Synthesis Methods, 3D Print Filament Fabrication, and Filament Filler.” IPTEK The Journal of Engineering, vol. 8, no. 1, 2022, p. 26.

Utami, R., et al. “Synthesis and Characterization of Hydroxyapatite Bioceramics from Shells of Serai Snail and Mangrove Crab in Tanjung Jabung Beach: Effect of Milling Process.” IOP Conference Series: Materials Science and Engineering, vol. 1173, no. 1, 2021, p. 012028.

Wafi, Abdul, et al. “Analisis Kuat Tarik Dan Elongasi Film Gelatin – Khitosan.” ALCHEMY, vol. 8, no. 1, June 2020, p. 1.

Wu, Dan, et al. “3D-Printed PLA/HA Composite Structures as Synthetic Trabecular Bone: A Feasibility Study Using Fused Deposition Modeling.” Journal of the Mechanical Behavior of Biomedical Materials, vol. 103, Mar. 2020, p. 103608.

Wu, Shih-Ching, et al. “Synthesis of Hydroxyapatite from Eggshell Powders through Ball Milling and Heat Treatment.” Journal of Asian Ceramic Societies, vol. 4, no. 1, Mar. 2016, pp. 85–90.

Xue, Wen, et al. “Melt Spinning of Nano-Hydroxyapatite and Polycaprolactone Composite Fibers for Bone Scaffold Application.” Journal of Materials Science, vol. 54, no. 11, June 2019, pp. 8602–12.


Refbacks

  • There are currently no refbacks.
slot gacor slot