Improving implementation of occupational health and safety of construction company by Job Safety Analysis (JSA) method (study case at PT Arto Moro Sentosa)

Arif Budi Sulistyo, Nugroho Pratama Putra, Hartadi Wijaya, Nur Hidayanti

Abstract


The construction sector is a sector that employs many people who have high risk of work accidents, because a lot of work in this sector is possibility carried out by unsafe actions or unsafe conditions. PT. Arto Moro Sentosa is company which operates in general trading, general construction, suppliers, outsourcing, etc., is aware that the business has a high risk of work accidents. The lack of employee awareness will have an impact on the magnitude of the risks that must be borne by the worker and the company. The purpose of this research is determining work accident records for the Occupational Health and Safety (OHS) system, employee risks, and existing improvements at company. By knowing the classification of hazards based on the type of accident, this research uses the Job Safety Analysis (JSA) method, histograms, Pareto diagrams, and cause-and-effect (fish bone) diagrams. Based on the author's observations, company data related to OHS (Occupational Health and Safety) and interviews with the directors, could be obtained a history of work accidents based on the type of accident. Here are ergonomic work accidents (57.89%), physical factor accidents ( 31.58%), chemical factor accidents (5.26%), biological factor accidents (5.26%), and psychological factor accidents (0%). Several recommendation is performed to avoid repeated accident by providing training programs on OHS to workers, paying more attention to OHS supervision, giving sanctions to workers who violate OHS.


Keywords


Ergonomic; Job Safety Analysis; Occupational Health and Safety; Risk Matrix

Full Text:

PDF

References


Y. Alfiansah, B. Kurniawan, M. Peminatan Keselamatan dan Kesehatan Kerja, F. Kesehatan Masyarakat, U. Diponegoro, and B. Keselamatan dan Kesehatan Kerja, “Analisi Upaya Manajemen K3 Dalam Pencegahan dan Pengendalian Kecelakaann Kerja Pada Proyek Konstruksi PT.X SEMARANG,” vol. 8, no. 5, 2020.

Sofian, Keselamatan dan kesehatan kerja, no. September 2019. 2017.

Sama’mur, Penerapan Kesehatan Dan Keselamatankerja(K3) Dengan Pendekatan Job Safety Analysis (Jsa). 2017.

M. T. K. R. Indonesia, kecelakaan kerja. Menteri Tenaga Kerja Republik Indonesia.

A. B. Sulistyo, I. Rifki, and P. Gautama, “Evaluasi Proyek Fabrikasi Matarbari Unit-02 Dengan Metode Cpm Dan Pert Pt. Dui Esa Unggul,” J. InTent, vol. 5, no. 1, pp. 14–27, 2022.

PT. ARTO MORO, “Sejarah perusahaan,” 2015.

P. K. Suma’mur, Keselamatan dan Kesehatan Kerja. 1981.

F. Ramadhan, “Analisis Kesehatan dan Keselamatan Kerja ( K3 ) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control ( HIRARC ),” no. November, 2017.

A. A. CHOLIL, S. SANTOSO, T. R. SYAHRIAL, E. C. SINULINGGA, and R. H. NASUTION, “Penerapan Metode Hiradc Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Gas Uap,” J. Bisnis dan Manaj. (Journal Bus. Manag., vol. 20, no. 2, pp. 41–64, 2020.

J. Atmaja et al., “Penerapan Sistem Pengendalian Keselamatan dan Kesehatan Kerja pada Pelaksanaan Proyek Konstruksi di Kota Padang,” Ed. Oktober, no. 2, 2018.

A. B. Sulistyo and A. D. Maulana, “PENERAPAN KESELAMATAN KERJA PADA PROSES LOADING- UNLOADING CURRENT TRANSFORMER DI PT CPSI,” pp. 1–15.

C. T. Jaya, “Safety Adalah Hal Penting Dalam Pekerjaan,” 2021.

OSHA, “Recommended Practices for Safety and Health Programs,” no. October, 2016.

Y. Ilmansyah et al., “Penerapan Job Safety Analysis sebagai Upaya Pencegahan Kecelakaan Kerja dan Perbaikan Keselamatan Kerja di PT Shell Indonesia,” Profisiensi, vol. 8, no. 1, pp. 15–22, 2020, doi: https://doi.org/10.33373/profis.v8i1.2521.

M. M. Nasrulloh, N. Budiharti, and H. Galuh, “UPAYA PENGENDALIAN RESIKO KECELAKAAN KERJA MENGGUNAKAN METODE JOB SAFETY ANALYSIS PADA PEKERJAAN PT . SUMBER ALAM RAYA,” J. Valtech, vol. 5, no. 1, pp. 79–86, 2022.

A. Rahman, D. Djafri, and V. Triana, “The Risk Assessment of Occupational Safety Using Job Safety analysis ( JSA) at PT. P&P Lembah Karet Padang,” KnE Life Sci., vol. 4, no. 10, p. 365, 2019, doi: 10.18502/kls.v4i10.3741.

M. A. Umaindra and D. S. Saptadi, “Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode Jsa (Job Safety Analysis) Di Departemen Smoothmill PT Ebako Nusantara,” Ind. Eng. Online J., vol. 7, no. 1, pp. 1–11, 2018.

Y. Rasoulzadeh, S. S. Alizadeh, and S. Valizadeh, “Health , Safety and Ergonomically Risk Assessment of Mechanicians using Job Safety Analysis ( JSA ) Technique in an Iran City,” vol. 8, no. 28, pp. 1–11, 2015.

M. M. J. Robert, S. F. Bonny, and Soputan. M .E Gabby, “Manajemen Risiko Kesehatan Dan Keselamatan Kerja (K3) (Study Kasus Pada Pembangunan Gedung Sma Eben Haezar),” J. Ilm. Media Eng., vol. 4, no. 4, pp. 229–238, 2017.

R. R. Putri, “ANALISIS POTENSI BAHAYA SERTA REKOMENDASI PERBAIKAN DENGAN METODE HAZARD AND OPERABILITY STUDY ( HAZOPS ),” Ind. Eng. Online J., vol. 7, no. 2, 2018.

K. M. N. Aruan and M. L. Singgih, “Pengendalian Risiko Kecelakaan HSSE pada Proses Pembuatan Pipa Baja,” J. Tek. ITS, vol. 10, no. 2, pp. 52–57, 2021, doi: 10.12962/j23373539.v10i2.62628.

Budi Kho, “Pengertian Diagram Pareto dan Cara Membuatnya,” 2021.

H. Ghaisani and Erwin Dyah Nawawinetu, “Identifikasi Bahaya , Penilaian Risiko Dan Pengendalian Risiko,” Indones. J. Occup. Saf. Heal., vol. 3, no. 1, pp. 107–116, 2014.

H. Narvala, G. Mcdonald, and I. Ounis, “Identifying chronological and coherent information threads using 5W1H questions and temporal relationships,” Inf. Process. Manag., vol. 60, no. 3, p. 103274, 2023, doi: 10.1016/j.ipm.2023.103274.

K. Adi Nugraha, “JEPIN (Jurnal Edukasi dan Penelitian Informatika) Klasifikasi Pertanyaan Bidang Akademik Berdasarkan 5W1H menggunakan K-Nearest Neighbors,” 2020.

M. Nur, P. T. Industri, F. Sains, and U. I. N. S. Riau, “Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study ( HAZOP ) Di PT . XYZ,” vol. 4, no. 2, pp. 133–138, 2018.

R. Utami, “JSA Pada Pekerjaan PPSU Di Kelurahan Cempaka Putih Timur Jakarta Tahun 2019,” Skripsi, pp. 1–81, 2019.

A. B. Sulistyo, T. Zakaria, and R. Riyandi, “Analisis Overall Equipment Effectiveness Mesin Vertical Roller Mill ( Vrm ),” vol. 2, no. 1, 2019.




DOI: https://doi.org/10.31315/opsi.v17i1.11005

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id

 

indexed by:

 
 
 


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats