Eksperimen Optimasi Kekerasan Paduan Kuningan dengan Metode Desain Faktorial 33

Authors

  • Novira Dwi Rahma (SINTA ID: 6022570) Program Studi Teknik Industri, Fakultas Teknik Industri, Universitas Pembangunan Nasional "Veteran" Yogyakarta.
  • Gunawan Madyono Putro Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta
  • S. Sadi Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta
  • Muhammad Shodiq Abdul Khanan Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta

DOI:

https://doi.org/10.31315/opsi.v12i2.3150

Keywords:

experimental design, brass, full factorial

Abstract

Brass material is widely used by SME industries in Indonesia including the gamelan industry, the pottery industry, and the handicraft industry. This research aims to improve the quality of brass material which is a combination of copper and nickel material. The ability of the manufacturing industry in Indonesia in processing mining raw materials with good quality is still low. There has not been a specific effort to improve quality through research and development. The long-term goal of this research is to build excellence in the material field in Indonesian industries. This advantage is very important for industries in Indonesia to compete globally.

The method used is a 3 variable factorial design (temperature, temper time, cooling media) with each of 3 levels (33) to determine the most influential factors and improve product quality so that the highest level of product hardness. From the results of data processing obtained from the three factors that have a significant effect and settings that provide the greatest level of violence viz

Author Biographies

Novira Dwi Rahma, (SINTA ID: 6022570) Program Studi Teknik Industri, Fakultas Teknik Industri, Universitas Pembangunan Nasional "Veteran" Yogyakarta.

    

Gunawan Madyono Putro, Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta

Teknik Industri

S. Sadi, Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta

Teknik Industri

Muhammad Shodiq Abdul Khanan, Jurusan Teknik Industri FTI UPN "Veteran" Yogyakarta

Teknik Industri

References

Alma, B, 2011, Manajemen Pemasaran dan Pemasaran Jasa, Penerbit Alfabeta, Bandung

Arifianto, F.S, Saleh, M,A.F dan Anisa, 2013, Identifikasi Faktor Signifikan pada Rancangan Faktorial Fraksional 2^(k-p), Jurnal Matematika Statistika, Komputasi Vol, 9 No,2 (Diakses pada tanggal 14 Mei 2018)

Gaspersz, V, 1991, Metode perancangan percobaan, CV,ARMICO, Bandung,

Montgomery, D,C,, 2001, Introduction to Statistical Quality Control, 4th Edition, John Wiley & Sons, Inc,, New York

Montgomery, D,.C, 2005, Supplemental Text Material For Each

Chapter of The 6th Edition of Design and Analysis of Experiments, Http://www,wiley,com/ college/montgomery,

Downloads

Published

2019-12-31

Issue

Vol. 12 No. 2 (2019): ISSN 1693-2102

Section

Artikel

License

Authors who publish articles in this journal agree to the following conditions:

  1. Copyright remains with the author and gives the Opsi journal the right as a priority to publish its articles with Creative Commons Attribution 4.0 International license. Which allows articles to be shared with acknowledgement of the author of the article and this journal as the place of publication.
  2. Authors can distribute their articles on a non-exclusive basis (e.g. in university repositories or books) with notification or acknowledgement of publication in Opsi journals.
  3. Authors are allowed to post their work online (e.g. on a personal website or in a university repository) before and after the submission process (see The Effect of Open Access)
 

Lisensi Creative Commons

This work is Licensed Under a Creative Commons Attribution 4.0 International license.