CNC Programming Software Design to Optimizing Batik Stamping Time

Rian Prasetyo, Ainur Komariah

Abstract


Batik is an original Indonesian heritage, that must be preserved and it is the mainstay for implementation of “Making Indonesia 4.0”. It was published many research about stamp batik manufacturing, but still have limitation of motive variation and slackly design process. This research aim to develop the way to making CNC program to be quickly, besides of high variation of batik motive. Source code in python programming language, was built for extension tool in inscape software. Extentension is used to create stamp point, depend on various motive size. Source code created in .py and .inx format will be save in “ekstensi” folder. Based on coordinate point of stamping in stamp batik, CNC program will be created, using “G-code tools” extension that was available in inscape software menubar. CNC programming used extension was built is measured about  time of process and compared to manual CNC programming. CNC program that has been built then tested in CAMotics software. The results of this research show that CNC program could maked with this extension for various dimension od batik stamp and in 2, 4, 6, 8, 10, and 12 meters of cloth length. CNC programming with extension developed, can reduce time up to 96.05%.


Keywords


Stamp batik; Stamp batik CNC; Stamp batik manufacturing; CNC program

Full Text:

PDF

References


Alamsyah, A. (2018). Kerajinan Batik dan Pewarnaan Alami. Endogami: Jurnal Ilmiah Kajian Antropologi, 1(2), 136. https://doi.org/10.14710/endogami.1.2.136-148

Asmal, S., Subagyo, Wibisono, M. A., & Sudiarso, A. (2015). Pengembangan Sistem CAD Motif Batik Berbasis Karakter. Seminar Nasional IENACO – 2015, ISSN 2337-(2000), 218–225.

Dwinugroho, T. B. (2017). Implementasi Programmable Logic Control ( PLC ) pada Griper Mesin Batik Cap Otomatis Berbasis CNC. EJST (Industrial Engineering Journal of The University of Sarjanawiyata Tamansiswa), 1(1), 40–50.

Eskani, I. N., Haerudin, A., Setiawan, J., Lestari, D. W., & Astuti, W. (2019). Batik Fungsional Sebagai Salah Satu Strategi Pengembangan Industri Batik Dalam Memasuki Era Industri 4.0. Prosiding Seminar Nasional Industri Kerajinan Dan Batik 2019, 1–12. https://proceeding.batik.go.id/index.php/SNBK/article/view/17/14

Hanif, M., Wibisono, M. A., & Dharma, I. G. B. B. (2017). Perancangan Mesin Batik Cap Otomatis Tipe Modul Cap Bergerak. Prosiding Seminar Nasional Teknik Industri Universitas Gadjah Mada 2017, November, 87–94.

Issara Okvia Dita. (2017). Sistem Desain dan Manufaktur Pakaian Batik. Universitas Gadjah Mada.

Narendra Normasyah Fasla, A. B. W. (2013). Buku Visual Batik Jetisan Sidoarjo. Jurnal Desain Komunikasi Visual UPN “Veteran” Jatim, 2, 2010–2015.

Purba, E. J., Putra, A. K., & Ardianto, B. (2020). Perlindungan Hukum Warisan Budaya Tak Beda Berdasarkan Convention for The Safeguarding Of The Intangible Cultural Heritage 2003 dan Penerapannya di Indonesia. Uti Possidetis: Journal of International Law, 1(1), 90–117.

Setyaningsih, I. (2020). TINGKAT KEPEDULIAN IKM BATIK TERHADAP ISU LINGKUNGAN : PERBANDINGAN DI YOGYAKARTA DAN PEKALONGAN The Level of Concern of IKM Batik to Environmental Issues : Comparison in Yogyakarta and Pekalongan. Seminar Nasional Teknologi Industri Hijau 3, 90–95.

Wibisono, M. A., Dharma, I. G. B. B., Suwastono, A., & Imani, M. A. (2012). Integrasi Desain dan Manufaktur Batik Cap. In Jurnal Imu Pengetahuan dan Teknologi Tepat Guna (Vol. 1, pp. 73–82).




DOI: https://doi.org/10.31315/opsi.v14i1.4700

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id

 

indexed by:

 
 
 


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats