Analysis of Total Productive Maintenance (TPM) Application Using Overall Equipment Effectiveness (OEE) and Six Big Losses on Disamatic Machine PT. XYZ

Musyafa'ah Musyafa'ah, Amanda Sofiana


PT. XYZ is a manufacturing company which engages in Defense and Commercial. One of the machines used is a disamatic machine which is a machine that produces shoulder components for railway tools. This machine is an old machine, so that problems that arose on the production floor were often caused by the cessation of the process on the production floor due to machines stuck, machines damaged, or machines not running properly so that it can reduce the machines productivity. The method used in analyzing this problem is by calculating the value of Overall Equipment Effectiveness (OEE) and Six Big Losses to identify the performance of industrial machines. From the results of data processing, the OEE value owned by PT. XYZ is 61.94%. This value is still below the ideal value standard set by JIPM, which is 85%. The factor which influenced the lower OEE value was the low-efficiency performance, which is 68.29%. Based on the calculation of Six Big Losses, the most dominant loss causing a decrease in machine effectiveness was reduce speed losses, which is 42.38%. This factor was analysed by Pareto and fishbone diagram. The result of this study can be useful for the company to increase their productivity which will increase their profits.


TPM, Six Big Losses, OEE, disamatic machine


Alvira, D., Helianty, Y., & Prassetiyo, H. (2015). Usulan Peningkatan Overall Equipment Effectiveness ( Oee ) Pada Mesin Tapping Manual Dengan Meminimumkan Six Big Losses. Jurnal Itenas Bandung.

Firmansyah, M. M., Susanty, A., & Puspitasari, D. (2015). Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Pencelupan Benang (Studi Kasus PT. Pismatex Textile Industry). Industrial Engineering Online Journal.

Habib, A. S., & Supriyanto, H. H. (2012). Pengukuran Nilai Overall Equipment Effectiveness ( OEE ) Sebagai Pedoman Perbaikan Efektivitas Mesin CNC Cutting. Jurnal Teknik Pomits.

Hapsari, N., Amar, K., & Perdana, Y. R. (2012). PENGUKURAN EFEKTIVITAS MESIN DENGAN MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. SETIAJI MANDIRI. Spektrum Industri: Jurnal Ilmiah Pengetahuan Dan Penerapan Teknik Industri, 10, No. 2, 108–199.

Jannah, R. M., Supriyadi, S., & Nalhadi, A. (2017). Analisis Efektivitas pada Mesin Centrifugal dengan Menggunakan Metode Overall Equipment Effectiveness (OEE). Prosiding Seminar Nasional Riset Terapan| SENASSET, 2013, 170–175.

Madewell, M. (1998). Total productive maintenance. SAE Technical Papers.

S.Nakajima. (1988). Introduction to TPM: Total Productive Maintenance.pdf. Productivity Press, Cambridge.

Sharma, A., Yadava, G. S., & Deshmukh, S. G. (2011). A literature review and future perspectives on maintenance optimization. In Journal of Quality in Maintenance Engineering.

Siregar1, F. H., Susilawati2, A., Arief, D. S., & 3. (2017). Analisa Performance Mesin Screw Press Menggunakan Metoda Overall Equipment Effectiveness (Studi Kasus: Ptpn V Sei Pagar). Jurusan Teknik Mesin, Fakultas Teknik Universitas Riau.

Triwardani, D. H., Rahman, A., & Tantrika, C. F. M. (2013). No Title379 ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) DALAM MEMINIMALISI SIX BIG LOSSES PADA MESIN PRODUKSI DUAL FILTERS DD07 (Studi kasus : PT. Filtrona Indonesia, Surabaya, Jawa Timur). Jurnal Rekayasa Dan Manajemen Sistem Industri, 1, No. 2, 379–391.



  • There are currently no refbacks.

Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
email :


indexed by:


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats