Email this article 
Quality Control with Six Sigma Method to Minimize Polyester Fabric Product Defects at PT Sukuntex
Abstract
Quality control needs to be done to face industrial competition. PT. Sukuntex is a textile industry that produces fabrics, one of which is polyester with 58% production from the total fabric production. PT. Sukuntex has a make to order fabric production system, the company carries out quality control by inspecting every fabric produced in the quality control division. In this study, an analysis of polyester fabric quality control using the six sigma method with the DMAI (Define-Measure-Analyze-Improve) steps to determine the DPMO value, the company's sigma level, the causes of defects, and improvements. The results of this study found 3 dominant defects based on the Pareto diagram, namely thin thickness, sparse, and dirty oil. In calculating the DPMO value, the result is 49,825.15 meters with the sigma value obtained is 3.15. The sigma value can increase with quality improvement. Therefore, the causes of defects were analyzed using a fishbone diagram which resulted in human, machine, method, and environmental factors. FMEA-AHP method for improvement priorities, where FMEA analyzes the ranking of the causes of defects, then prioritizes improvement based on weights with AHP. Improvement plan using the 5W+1H method at the improve stage.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Akhirul, R. T. and Robecca, J. (2017) ‘Usulan Penerapan Metode Lean Six Sigma Untuk Meminimasi Jumlah Cacat Pada Produk Kain Cotton Di PT . Mulia Lestari', (70), p. 2.
Amrin, F. A. and Yuliawati, E. (2021) ‘Pengendalian Kualitas Kain Batik Tulis Dengan Metode Six Sigma Dan Failure Mode Effect And Criticality Analysis’, pp. 79–86.
Edomura, M. P., 2020, "Analisis Penyebab Defect dengan Metode Analytical Hierarchy Process ( AHP ) dan Failure Mode and Effects Analysis (FMEA) (Studi Kasus di PT. Aneka Ashilogam Karya", Skripsi, IST AKPRIND Yogyakarta.
Fithri, P. dan Chairunnisa, 2019, "Six Sigma Sebagai Alat Pengendalian Mutu pada Hasil Produksi Kain Mentah PT Unitex, Tbk", J@ti Undip : Jurnal Teknik Industri, vol. 14, no. 1, hal 43-52.
Gasperz, V. (2007) Lean Six Sigma for Manufacturing and Service Industries. Jakarta: Gramedia.
Lestari, F. A. and Purwatmini, N. (2021) ‘Pengendalian Kualitas Produk Tekstil Menggunakan Metoda DMAIC’, Jurnal Ecodemica: Jurnal Ekonomi, Manajemen, dan Bisnis, 5(1), pp. 79–85.
Lestari, S. and Junaidy, M. H. (2020) ‘Pengendalian Kualitas Produk Compound At-807 di Plant Mixing Center Dengan Metode Six Sigma Pada Perusahaan Ban di Jawa Barat’, Jurnal Teknik, 9(1).
Mahardwijantoro, E. W. (2017) Pengendalian Kualitas Produk Benang DTY (Draw Texturized Yarn) dengan Menggunakan Metode Lean Six Sigma (Studi Kasus: PT. Mutu Gading Tekstil, Karanganyar, Surakarta), Jurnal Ekonomi 18(1).
Manan, A., Handika, F. S. and Nalhadi, A. (2018) ‘Usulan Pengendalian Kualitas Produksi Benang Carded dengan Metode Six Sigma’, Jurnal INTECH Teknik Industri Universitas Serang Raya, 4(1), p. 38.
Muhyidin Agus Wibowo, Pratikto and Wijayanti, W. (2016) ‘Pendekatan Lean Six Sigma, FMEA-AHP untuk Mengidentifikasi Penyebab Cacat pada Produk Sandal’, 4(2), pp. 185–197.
Prasetyo, A. et al. (2021) ‘Pengendalian Kualitas pada Spandek dengan Penerapan Six Sigma dan Kaizen untuk Meminimasi Produk Cacat (Studi Kasus: PT. ABC)’, Issn 2685-6875, pp. 29–34.
Sirine et al. (2017) ‘Pengendalian Kulitas Menggunakan Metode Six Sigma (Studi Kasus pada PT Diras Concept Sukoharjo)’, AJIE-Asian Journal of Innovation and Entrepreneurship, 02(03), pp. 2477–3824.
Utomo, P. S., 2018, "Penerapan Analytical Hierarchy Process (AHP) dan Failure Mode and Effect Analysis (FMEA) untuk Mengidentifikasi Penyebab Defect Piano UP pada Departement Assy UP Studi Kasus : PT. YAMAHA INDONESIA", Skripsi, Teknologi Industri, Universitas Islam Indonesia, Yogyakarta.
DOI: https://doi.org/10.31315/opsi.v16i1.6786
Refbacks
- There are currently no refbacks.
Secretariat:
Industrial Engineering Department
Faculty of Industrial Engineering, UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id
indexed by:
 |  |  |  |
 |  |  |  |
 |
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
View My Stats