Simulation Model of Production System Using Dynamic System Approach to Increase Production Capacity Tofu Factory

Tita Talitha, Rexza Berliyana

Abstract


The speed in distributing the products of the industry is influenced by the speed of production produced by the industry itself. SMEs know that ECO is one of the manufacturing industries engaged in food manufacturing. there are obstacles (problems) that are experienced, namely the occurrence of inequality between the production capacity of tofu that can be produced and the demand for tofu that must be met. The purpose of this study is to increase the production capacity of Tofu Eco SMEs in terms of increasing working time. The method used in this research is the dynamic system method using the PLE vensim software. The results of the study show that based on the actual system conditions, it is known that there are 25 workers with 8 working hours per day, and an average production capacity of 957 barrels per month is obtained month with an average demand of 1005 barrels /month. The results of the alternative simulation I, have an average production capacity of 1,080 barrels/month. The results of the scenario II simulation show that the average production capacity is 1,230 barrels/month. From the simulation results of alternative scenarios, it can be seen that for production demand below 1,080 barrels/month, the alternative used is to add 1 hour (60 minutes) of overtime, while for requests above 1,079 barrels/month with a maximum production demand of 1,255 barrels/month, alternative scenarios can be used. II with the addition of 2 hours 30 minutes (150 minutes) of overtime.


Keywords


Production Capacity; System Dynamic; Tofu; Overtime

References


Alfiyah, S., Donoriyanto, D. S., & Safirin, T. (2022). Model Sistem Dinamis Penggantian Jarum. 17(1), 25–37.

Alhamri, R. Z., & Suryani, E. (2016). OAJIS_29_1617.pdf. In Jurnal Sistem Informasi (Vol. 5, Issue 5, pp. 542–554).

Almamalik. (2021). Pengenalan Pemodelan Sistem Dinamik Menggunakan Vensim PLE. Guepedia.

Fortunella, A., Tama, I. P., & Eunike, A. (2015). Model Simulasi Sistem Produksi Dengan Sistem Dinamik Guna Simulation Model Of Production System With System Dynamic To Support Production Capacity Planning. Rekaya Dan Manajemen Sistem Industri, 3(2), 256–267.

KEMENPERIN. (2021). Pasok Kebutuhan Pangan Selama Pandemi, Kontribusi Industri Mamin Meroket. https://kemenperin.go.id/artikel/22682/Pasok-Kebutuhan-Pangan-Selama-Pandemi,-Kontribusi-Industri-Mamin-Meroket

Lestari, N. P., Pambudi Tama, I., & Hardiningtyas, D. (2013). Analisis Sistem Produksi Terhadap Profit Perusahaan Dengan Pendekatan Simulasi Sistem Dinamik (Studi Kasus: PT. Industri Sandang Nusantara Unit Patal Lawang) Production System Analysis Towards Company Profit Using System Dynamics Simulation Approach (Case. 952–963).

Maulidi, R. (2013). Perencanaan Kapasitas Terminal General Cargo. SISFO-Jurnal Sistem Informasi.

Mawengkang, H., & others. (2020). Analisis Keputusan Menggunakan Pendekatan Model Causal Loop Diagram (CLD) Model Dinamik untuk Perencanaan Wisata Syariah Berkelanjutan. Jurnal Mantik, 4(3), 2288–2291.

Nabillah, I., & Ranggadara, I. (2020). Mean Absolute Percentage Error untuk Evaluasi Hasil Prediksi Komoditas Laut. JOINS (Journal of Information System), 5(2), 250–255. https://doi.org/10.33633/joins.v5i2.3900

Pujawan, I.N. and Mahendrawathi, E. . (2017). Supply Chain Management (3rd ed.). ANDI.

Rachma, E. A. (2020). Optimasi Perencanaan Produksi Dengan Menggunakan Model Sistem Dinamik Di PT X. Jurnal Optimasi Teknik Industri (JOTI), 2(1), 36. https://doi.org/10.30998/joti.v2i1.4425

Ridwan, A., Ferdinant, P. F., & Laelasari, N. (2019). Simulasi Sistem Dinamis Dalam Perancangan Mitigasi Risiko Pengadaan Material Alat Excavator Dengan Metode Fmea Dan Fuzzy Ahp. FLYWHEEL : Jurnal Teknik Mesin Untirta, V(1), 51. https://doi.org/10.36055/fwl.v0i0.5247

Rio Budianto Pasaribu. (2019). Penerapan Simulasi Dalam Pengoptimalan Supply Chain (Studi Kasus: PT. Tirta Bumi Medan Perkasa). In Repositori Institusi Universitas Sumatera Utara (Vol. 1, Issue 3). Universitas Sumatera Utara.




DOI: https://doi.org/10.31315/opsi.v15i2.8059

Refbacks

  • There are currently no refbacks.




Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id

 

indexed by:

 
 
 


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats