Desain Lingkungan Kerja Berdasarkan Pendekatan Kesehatan dan Keselamatan Kerja
DOI:
https://doi.org/10.31315/opsi.v12i2.3101Keywords:
Work environment, K3 design, Increased productionAbstract
Kalasan Fried Chicken Industry Center is one of the home industries producing fried chicken in Yogyakarta. Initial measurements obtained from the working environment conditions of occupational health and safety are still considered to be less than comfortable and in accordance with standards. As a result of lack of lighting and high room temperature, workers often experience eye fatigue, dizziness, frequent loss of focus and poor quality fried chicken production. Occupational health and safety according to the standard, it is necessary to improve the lighting aspect with the Lumen Method (Lumen Method or Zonal Cavacity Method, ZCM), the physical environment in terms of temperature is designed by increasing the fan capacity needed by the work environment so that the number and type of fans with quality can be determined the right air for the room. The lighting needs of the work environment are 9 24 watt lights and an exhaust fan and sufficient air volume. The results of the implementation were able to increase the level of lighting and temperature in accordance with work comfort.
References
Amir, A, 2009, Lighting Style, Jakarta: PT Gramedia
Badan Standardisasi Nasional (BSN), 2001, Tata Cara Perancangan Sistem Pencahayaan Buatan pada Bangun Gedung, Jakarta: Badan Standarisasi Nasional (BSN)
Bridger, R, 1995, Introduction to Ergonomics, Singapore: McGraw-Hills
Chengalur, S, 2004, Kodaks Ergonomic Design for People at Work 2nd edition, New Jersey: Jhon Wiley and Sons Inc
Siswanto. 1993, Penerangan, Jakarta: Balai Pelayanan Ergonomi
Sujudi, A, 1999, Persyaratan Kesehatan Lingkungan Kerja, Jakarta: DepKes
Suma’mur, 1996, Ergonomi untuk produktivitas kerja. Jakarta: CV Hajimas Agung
Sutalaksana I.Z., Ruhana A., dan Jann H.T., 2006, Teknik Perancangan Sistem Kerja, Bandung: Penerbit ITB
Wignjosoebroto, S, 2003, Ergonomi, Studi Gerak dan Waktu : Teknik Analisis untuk Peningkatan Produktivitas Kerja, Surabaya: Penerbit Guna WidyaRangkuti, F., 2005, Analisis SWOT Teknik Membedah Kasus Bisnis, PT Gramedia Pustaka Utama, Jakarta.
Wilson, L, 2010, How to Implement Lean Manufacturing. The McGraw-Hill Companies, Inc., United States.
Downloads
Published
Issue
Section
License
Authors who publish articles in this journal agree to the following conditions:
- Copyright remains with the author and gives the Opsi journal the right as a priority to publish its articles with Creative Commons Attribution 4.0 International license. Which allows articles to be shared with acknowledgement of the author of the article and this journal as the place of publication.
- Authors can distribute their articles on a non-exclusive basis (e.g. in university repositories or books) with notification or acknowledgement of publication in Opsi journals.
- Authors are allowed to post their work online (e.g. on a personal website or in a university repository) before and after the submission process (see The Effect of Open Access)
This work is Licensed Under a Creative Commons Attribution 4.0 International license.