Analisis Beban Kerja Fisiologis sebagai Dasar Penentuan Waktu Istirahat untuk Mengurangi Kelelahan Kerja
DOI:
https://doi.org/10.31315/opsi.v13i1.3469Keywords:
Break Time, Physiological Workload, % CVL, 10 Pulse MethodAbstract
510 minutes of work time a day with a break of 30 minutes is felt by employees of PT. Yogya Indo Global is too heavy. This company, which is engaged in wood processing, has 4 work stations, namely the Plenner process station, the Jointer process, Telthing and cutting parts. To reduce the physical workload in this study will be determined the length of rest time using the Indirect Assessment Method with categories of physical (physiological) workload, pulse (beats / minutes), classification% CVL (Cardiovasculair Load), calculating energy consumption, and calculate the need for rest. The study was conducted at rest at 09.30 and at 15.00 WIB. Pulse measurements are carried out using the 10 Pulse Method which then affects the amount of energy consumption. Based on the research results, it is known that at the Plenner machine work station, the Jointer and Telthing machines are in the classification of% CVL, the workload is due to the level of 30% -60%. Based on the results of the calculations, the work station for the Plenner, Jointer, Telthing and cutting process needs to be added by each time by 10 minutes, 5 minutes, 13 minutes and 10 minutes at 09.30 and the addition of 28 minutes, 25 minutes, 35 minutes and 15 at 3:00 p.m..
References
Christensen, E.H. (1991). Physiology of Work. Encyclopedia of Occupational Health and Safety. 3nd Edition. Geneva: ILO. p. 1698-1700.
Kilbon, A. (1992). Measurement and Assessment of Dynamic Work. Dalam: Evaluation of Human Work. A Practical Ergonomic Methodology, ed. by Wilson, JR dan Corlett, EN, Taylor and Francis, London: pp. 520-542. pp. 641-661.
Konz, S., (1998), Work/Rest: Part II – The Scientific Basis (Knowledge Base) for the Guide, International Journal of Industrial Ergonomics, Vol. 22, Hlm. 73-99.
Manuaba, A. (2005). Ergonomi dalam Industri. Universitas Udayana.
Nurmianto, Eko. (1996). Ergonomi Konsep Dasar dan Aplikasinya. Guna Widya, Institut Teknologi sepuluh November, Surabaya.
Nurmianto, E. (1996). Ergonomi Konsep Dasar dan Aplikasinya. Guna Widya, Institut Teknologi sepuluh November, Surabaya.
Rodahl, K. (1989). The Physiologi of Work. London: Taylor & Francis.
Sastrowinoto, Suyatno. (1985). Meningkatkan Produktifitas dengan Ergonomi, Jakarta: Pustaka Binaman Pressindo.
Sastrowinoto, S. (1985). Meningkatkan Produktifitas dengan Ergonomi, Jakarta: Pustaka Binaman Pressindo.
Sutalaksana, I.Z. (1979). Teknik Tata Cara Kerja. Bandung: ITB.
Tarwaka, Solichul H.B, Lilik S. (2004). Ergonomi untuk Keselamatan Kerja dan Produktivitas. Surakarta: Uniba Press.
Tarwaka, Solichul H.B, Lilik S. (2004). Ergonomi untuk Keselamatan Kerja dan Produktivitas. Surakarta: Uniba Press.
Wignjosoebroto, Sritomo. (2003). Ergonomi Studi Gerak dan Waktu. Edisi Pertama. Jakarta: Guna Widya.
Downloads
Published
Issue
Section
License
Authors who publish articles in this journal agree to the following conditions:
- Copyright remains with the author and gives the Opsi journal the right as a priority to publish its articles with Creative Commons Attribution 4.0 International license. Which allows articles to be shared with acknowledgement of the author of the article and this journal as the place of publication.
- Authors can distribute their articles on a non-exclusive basis (e.g. in university repositories or books) with notification or acknowledgement of publication in Opsi journals.
- Authors are allowed to post their work online (e.g. on a personal website or in a university repository) before and after the submission process (see The Effect of Open Access)
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
