Prosthesis Mapping and Forecasting as a Direction of Innovation in Prosthesis Product Development
DOI:
https://doi.org/10.31315/opsi.v14i1.4579Keywords:
Prosthetics, Mapping, Forecasting, InnovationAbstract
The objective of this study is to make a need assessment in the form of identifying trends in the need for prostheses and mapping the priority types of prostheses developed at Dr. R. Soeharso Orthopedic Public Hospital, Surakarta as a reference for innovation in the development of prosthesis products at Dr. R. Soeharso Orthopedic Public Hospital, Surakarta. The method used was descriptive analysis and moving average forecasting of historical data on the use of prostheses. From the results of the descriptive analysis, it was found that the most common types of the prosthesis were under the knee prostheses and the types of prostheses that mostly used imported components were finger prostheses and prostheses that have been developed locally which were lower and upper knee prostheses and also Syme. The results of the prediction of the number of prostheses showed a stable trend and tended to increase slightly with the MAD error rate of 2.375 and MSE of 10.378 and MAPE of 36%. With this accuracy, the results of the forecasting can be used as a reference for the hospital to make supplies of prosthesis components in the next period so that the time for making prostheses can be shortened. Meanwhile, for the development of the direction of innovation, recommendations for the type of prosthesis that is a priority to be developed at Dr. R. Soeharso Orthopedic Public Hospital, Surakarta is an innovation of under-knee and finger prostheses by implementing low-cost product designs.
References
Direktorat Jenderal, B. K. dan A. K. (2015). Rencana Aksi Program 2015-2019 Program Kefarmasian dan Alat Kesehatan. In Kemenkes. https://kesmas.kemkes.go.id/assets/upload/dir_60248a365b4ce1e/files/RENCANA-AKSI-PROGRAM-KESMAS-2015-2019-edit-11-April-2018_1023.pdf
Faatih, M. (2019). Riset Kolaboratif untuk Kemandirian Produk Alat Kesehatan: Need Assessment dan Prioritisasi Pengembangan Alat Kesehatan Dalam Negeri. In Puslitbang Sumber Daya dan Pelayanan Kesehatan Badan Penelitian dan Pengembangan Kesehatan Kementerian Kesehatan RI 2019.
Fauziah, R.A., Sriwarno, A. B. (2014). Pengembangan Desain Kaki Prostetik yang Berbasis Low-Cost untuk Industri Kecil Kaki Palsu di Indonesia. Jurnal Tingkat Sarjana Dan Desain, 1, 1–7.
Harinaldi. (2005). Prinsip-Prinsip Statistik untuk Teknik dan Sains (L. Simarmata (ed.)). Penerbit Erlangga.
Jumena, D; Adlis, A. . (2010). Desain Prosthesis Endoskeletal Bawah Lutut Untuk Penyandang Cacat. National Conference on Applied Ergonomics 2010. http://repository.unand.ac.id/88/1/Jumeno_TIUnand.doc
Kim, S., & Kim, H. (2016). A new metric of absolute percentage error for intermittent demand forecasts. International Journal of Forecasting, 32(3), 669–679. https://doi.org/10.1016/j.ijforecast.2015.12.003
Mckenzie, J. (2011). Mean absolute percentage error and bias in economic forecasting. Economics Letters, 113(3), 259–262. https://doi.org/10.1016/j.econlet.2011.08.010
Montfgomery, Douglas C; Jennings, Cheryl L; Kulahci, M. (2008). Introduction to Time Series Analysis and Forecasting (Vol. 7, Issue 2). A John Wiley & Sons, Inc., Publication.
Navarro, M., Michiardi, A., Castan, O., & Planell, J. A. (2008). Biomaterials in orthopaedics. July, 1137–1158. https://doi.org/10.1098/rsif.2008.0151
Parekh, P., & Ghariya, V. (2015). Analysis of Moving Average Methods. 1, 178–179.
Prawira, H. A., & Rachmat, N. (2018). Gambaran Penerimaan Diri Pasien Paska Amputasi Tranrtibia Setelah Menggunakan Transtibial Prosthesis. Jurnal Pendidikan Kesehatan, 7(1), 10. https://doi.org/10.31290/jpk.v7i1.242
Rahyussalim, A. J., Marsetio, A. F., Saleh, I., Kurniawati, T., & Whulanza, Y. (2016). The Needs of Current Implant Technology in Orthopaedic Prosthesis Biomaterials Application to Reduce Prosthesis Failure Rate. 2016.
Rizal, J., & Akbar, S. (2015). Perbandingan uji stasioner data time series antara metode: control chart, correlogram, akar unit Dickey Fuller, dan derajat integrasi. Jurnal Gradien, 11(1), 1040–1046.
Sanjaya, G. E. (2010). Eksperimen Komparasi Prosthetic Tangan Berdasarkan Pengaruh Desain Metacarpal dan Phalanx Phalangeal. Universitas Sebelas Maret Surakarta.
Sungkawa, I., & Megasari, R. T. (2011). NILAI RAMALAN DATA DERET WAKTU DALAM SELEKSI MODEL PERAMALAN VOLUME PENJUALAN PT SATRIAMANDIRI CITRAMULIA Iwa Sungkawa ; Ries Tri Megasari. ComTech, 2(2), 636–645.
Suryawan, D., Ridlwan, M., Setiadi, A., & Kaliurang, J. (2019). Inovasi desain dan simulasi model prostesis bawah lutut berdasarkan antropometri orang indonesia. 14(1), 30–36.
Vitriana. (2002). Rehabilitasi pasien amputasi bawah lutut dengan menggunakan Immediate Post Operative Prosthetic.
Wu, L., Liu, S., & Yang, Y. (2016). Grey Double Exponential Smoothing Model and Its Application on Pig Price Forecasting in China. Applied Soft Computing Journal, 39, 117–123. https://doi.org/10.1016/j.asoc.2015.09.054
Downloads
Published
Issue
Section
License
Authors who publish articles in this journal agree to the following conditions:
- Copyright remains with the author and gives the Opsi journal the right as a priority to publish its articles with Creative Commons Attribution 4.0 International license. Which allows articles to be shared with acknowledgement of the author of the article and this journal as the place of publication.
- Authors can distribute their articles on a non-exclusive basis (e.g. in university repositories or books) with notification or acknowledgement of publication in Opsi journals.
- Authors are allowed to post their work online (e.g. on a personal website or in a university repository) before and after the submission process (see The Effect of Open Access)
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
