Design of Automatic Areca Fruit Dryer Using Quality Function Deployment (QFD) Approach
DOI:
https://doi.org/10.31315/opsi.v15i2.6289Keywords:
Fruit Dryer, Areca Caechu, QFD, DesignAbstract
The processing of dried betel nut by the people of West Kalimantan consists of 2 stages, namely drying and stripping the betel nut. The drying process usually carried out by farmers is drying directly in the sun, and the smoking process uses fire to heat. The method of drying the areca nuts takes about 14-15 days. This study will examine the problems faced by farmers in the process of drying areca nuts. Based on the issue of drying areca nuts, it is necessary to have an alternative method of drying that is more efficient. Areca nut drying machine is an alternative to obtain dried betel nut relatively quickly with well-maintained fruit quality. The design of the areca nut drying machine is made based on the identification of farmers' needs. Identifying farmers' needs or desires will be an attribute of product development, and technical parameters are determined to meet these product attributes. The method that will be used is the Quality Function Deployment (QFD) method. The study results that priority attributes must be completed based on calculations in the planning matrix using QFD. The design of the areca nut has dimensions of 260 mm x 490 mm, with the specifications of the tool consisting of two main parts, namely an inner filter (a place for betel nuts) and a betel nut dryer.
References
Cohen, L. (1995). Quality Function Deployment: How To Make QFD Work For You. Addidon-Wesley Publishing Company.
Firmansyah. (2017). Rancang Bangun Alat Pengering Buah Pinang Dengan Metode Kansei Engineering dan Desain Eksperimen Di Desa Sungai Berembang Kabupaten Kubu Raya. Jurnal TIN Untan, 1(2), 1–5.
Juandi, M. P. O. (2017). Efek Variasi Massa Dari Biomassa Limbah Tempurung Kelapa Terhadap Laju Penurunan Kadar Air SEbagai Fungsi Waktu Hasil Pengeringan Buah Pinang Dengan Alat Pengering Tipe Kabinet. Jurnal APTEK (Aplikasi Teknologi), 9(1), 46–51.
Miladiyah, F. (2022). Provinsi Kalimantan Barat Dalam Angka 2022. Badan Pusat Statistik Kalimantan Barat.
Novarianto, H. (2012). Prospek Pengembangan Tanaman Pinang. Warta Litbang Pertanian, 34(1).
Paisal, E., Mahatta, F.; Mayu, B. (2018). Rancang Bangun Alat Pengering Tipe Tray Dryer. AGROTEKNIKA, 1(1), 31–38.
Purnama, P.Z., Budiharti, N., Priyasmanu, T. (2020). Rancang Bangun Mesin Oven Kopi Dengan Prinsip QFD Dan Ergonomi. Jurnal Valtech, 3(1), 25–31.
Putra, F. I. . P. A. . (2019). Alat Pengering Biji Pinang Berbasis Arduino. JTEV (Jurnal Teknik Elektro dan Vokasional), 6(1), 89–97.
Siboro, B., Sinaga, R., Simanjuntak, D. (2019). Rancang Bangun Alat Pengering Andaliman Dengan Menggunakan Metode Quality Function Deployment (QFD). Jurnal Sains dan Teknologi, 19(2), 133–140.
Sujana, I., Imansyah, F., Marpaung, J., Anggela, P.,Taufiqurrahman, M. (2021). Pemberdayaan Kelompok Tani Teluk Pinang Desa Sungai Kupah Melalui Peningkatan Kapasitas Teknologi Pengolahan Pasca Panen Buah Pinang. Jurnal Al-Khidmah, 4(1), 31–40.
Vezzetti, E., Moos, S., Kretly, S. (2011). A product lifecycle management methodology for supporting knowledge reuse in the consumer packed goods domain. Computer Aided Design, 43, 1902–1911.
Wang, Chih-Hsuan., Chen, J.-N. (2012). Using quality function deployment for collaborative product design and optimal selection of module mix. Computers & Industrial Engineering, 63(1), 1030–1037.
Zhang, Fanglan., Yang, Minglang., Liu, W. (2014). Using integrated quality function deployment and theory of innovation problem solving approach for ergonomic product design. Computers & Industrial Engineering, 76, 60–74.
Zhang, Xiufen., Zhang, Shuyou., Zhang, L.; Xue, J., Sa, R., Liu, H. (2019). Identification of product’s design characteristics for remanufacturing using failure modes feedback and quality function deployment. Journal of Cleaner Production, 239, 1–14.
Downloads
Published
Issue
Section
License
Authors who publish articles in this journal agree to the following conditions:
- Copyright remains with the author and gives the Opsi journal the right as a priority to publish its articles with Creative Commons Attribution 4.0 International license. Which allows articles to be shared with acknowledgement of the author of the article and this journal as the place of publication.
- Authors can distribute their articles on a non-exclusive basis (e.g. in university repositories or books) with notification or acknowledgement of publication in Opsi journals.
- Authors are allowed to post their work online (e.g. on a personal website or in a university repository) before and after the submission process (see The Effect of Open Access)
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
