Analysis Effect of the Nickel Ore Reduction Process on Sulfur Fixation in Reduction Kiln #5 at PT Vale Indonesia Tbk Using Factsage Simulation

Untung Sukamto, Aufa Asna Furrie Mutia Rahma

Abstract


The pyrometallurgical process which produces a product in the form of matte nickel is a nickel product that contains high sulfur so it is necessary to carry out a calcination process with the addition of sulfur and coal in the process using a reduction kiln. In order to increase the effectiveness of the process, PT Vale Indonesia Tbk's reduction kiln operations underwent several improvisations regarding the parameters used in the reduction kiln to adapt to the ore and changes to the equipment. This research aims to obtain optimal conditions for the reduction and sulfidation process to produce nickel in a reduction kiln with low fuel consumption. This research stage was carried out by making direct observations in the field as material for assessing actual conditions, then carrying out simulations using Factage software to obtain ideal conditions. Factage simulation results show an optimal calcine composition with 1.95% Ni; 25.86% Fe; 5.03%C; 63.28% Mg2Si2O6; and 3.03% Mg2SiO4 with a good calcine temperature of 717oC and federate at a kiln reduction of 767 DMT and the maximum sulfur fixation value obtained was 1.3 because sulfur and coal were added at the ideal dose, namely 9 kg/t and 35 kg/t.


Keywords


Nickel, Reduction, Extractive Metallurgy, Factsage Simulation, Sulfur

Full Text:

PDF

References


Azhim, M. F., Widiastrawan, I. M. D., Soraya, N., Dewi, T. S., & Semedie, T. (2022). Geochemical and Physical Characteristics of Nickel-Cobalt Laterite Deposits on Maniang Island , Kolaka , Southeast Sulawesi. Proceedings.

Bakti Zainal, Y., Sambasri, S., & Rusiana Iskandar, H. (2017). Kendali Temperatur Pada Rotary Kiln. 286–290. https://doi.org/10.21063/pimimd4.2017.xx-xx

Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Gheribi, A. E., Hack, K., Jung, I. H., Kang, Y. B., Melançon, J., Pelton, A. D., Petersen, S., Robelin, C., Sangster, J., Spencer, P., & Van Ende, M. A. (2016). FactSage thermochemical software and databases, 2010-2016. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 54, 35–53. https://doi.org/10.1016/j.calphad.2016.05.002

Crundwell, F. K., Moats, M. S., Robinson, T. G., & Davenport, W. G. (1961). Extractive metallurgy of copper, nickel, and cobalt. In Journal of the Franklin Institute (Vol. 272, Issue 1). https://doi.org/10.1016/0016-0032(61)90684-6

Dalvi (Chapter 2).pdf. (n.d.).

Dan, K., Temperature, O., Pada, P., Kiln, N., So, M. E., Mpc, M., & Network, N. (2019). MENURUNKAN EMISI SO 2 MENGGUNAKAN MPC ( MODEL PREDICTIVE CONTROL ) BERBASIS NEURAL NETWORK.

Harvey, J. P., Lebreux-Desilets, F., Marchand, J., Oishi, K., Bouarab, A. F., Robelin, C., Gheribi, A. E., & Pelton, A. D. (2020). On the application of the FactSage thermochemical software and databases in materials science and pyrometallurgy. Processes, 8(9), 1–31. https://doi.org/10.3390/PR8091156

Jiang, M., Sun, T., Liu, Z., Kou, J., Liu, N., & Zhang, S. (2013). Mechanism of sodium sulfate in promoting selective reduction of nickel laterite ore during reduction roasting process. International Journal of Mineral Processing, 123, 32–38. https://doi.org/10.1016/j.minpro.2013.04.005

Kritzinger, H. P., & Kingsley, T. C. (2015). Modelling and optimization of a rotary kiln direct reduction process. Journal of the Southern African Institute of Mining and Metallurgy, 115(5), 419–424. https://doi.org/10.17159/2411-9717/2015/v115n5a9

Liu, P., Li, B., Cheung, S. C. P., & Wu, W. (2016). Material and energy flows in rotary kiln-electric furnace smelting of ferronickel alloy with energy saving. Applied Thermal Engineering, 109, 542–559. https://doi.org/10.1016/j.applthermaleng.2016.08.095

Napier-Munn, T. (2014). Statistical methods for mineral engineers : how to design experiments and analyse data. 627.

Nick, L. (1984). Technical paper. Arab Energy, 5, Jul. 1984. https://doi.org/10.1017/cbo9780511791376.004

Nurjaman, F., Sa’adah, A., Shofi, A., Apriyana, W., & Suharno, B. (2018). the Effect of Additives and Reductors in Selective Reduction Process of Laterite Nickel Ore. Jurnal Sains Materi Indonesia, 20(1), 8. https://doi.org/10.17146/jsmi.2018.20.1.5404

Prasetyo, A. B., & Prasetyo, P. (2015). PENINGKATAN KADAR NIKEL (Ni) DAN BESI (Fe) DARI BIJIH NIKEL LATERIT KADAR RENDAH JENIS SAPROLIT UNTUK BAHAN BAKU NICKEL CONTAINING PIG IRON (NCPI/NPI). Metalurgi, 26(3), 123. https://doi.org/10.14203/metalurgi.v26i3.17

Quintero-Coronel, D. A., Guillin-Estrada, W. D., Echeverri-Roman, J. L., Maury, H., Corredor, L., Ruiz, J. A., Rueda, B. S., & Gonzalez-Quiroga, A. (2022). Large- and Particle-Scale energy assessment of reduction roasting of nickel laterite ore for Ferronickel production via the rotary Kiln-Electric furnace process. Thermal Science and Engineering Progress, 32(September 2021), 101331. https://doi.org/10.1016/j.tsep.2022.101331

Sufriadin, S., Idrus, A., Pramumijoyo, S., Warmada, I. W., Nur, I., Imai, A., Imran, A. M., & Kaharuddin, K. (2012). Thermal and Infrared Studies of Garnierite from the Soroako Nickeliferous Laterite Deposit, Sulawesi, Indonesia. Indonesian Journal on Geoscience, 7(2). https://doi.org/10.17014/ijog.v7i2.137

Tanjung, A. A., Gonzales, R., Seprianti, A., & Izati, R. (2022). Analisis Pemanfaatan Limbah Terak Nikel (Slag) sebagai Bahan Baku Pembuatan Shotcrete dan Penanganan Limbah Lumpur Nikel (Slurry) untuk Mengurangi Dampak Pencemaran Lingkungan. Jurnal Migasian, 6(2), 11–22. https://doi.org/10.36601/jm.v6i2.214

Yusfaldin, Y. (2017). Analisis Konsumsi Energi Rotary Kiln #1 Pada Proses Pengolahan Nikel Kabupaten Luwu Timur Sulawesi Selatan. Jurnal Geomine, 5(1), 35–41. https://doi.org/10.33536/jg.v5i1.96

Zahidin, A., & Rubianto, L. (2023). PERHITUNGAN NERACA MASSA, NERACA PANAS DAN EFISIENSI PADA ROTARY KILN UNIT KERJA RKC 3 PT SEMEN INDONESIA (PERSERO) Tbk. DISTILAT: Jurnal Teknologi Separasi, 6(2), 309–315. https://doi.org/10.33795/distilat.v6i2.114




DOI: https://doi.org/10.31315/jmept.v5i1.12351

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Aufa Asna Furrie, Untung Sukamto

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats