A Review of Reforming Processes in the Railway Manufacturing Industry : Case Study of PT. Industri Kereta Api (Persero)

Stephanus Yosi Kristanta, Atik Setyani, Sudaryanto Sudaryanto, Muhammad Syukron, Muji Santoso

Abstract


The railway manufacturing industry is critical for developing efficient and sustainable mass transportation systems. PT. Industri Kereta Api (Persero) (PT. INKA), a leading company in Indonesia, faces significant challenges due to deformation caused by residual stress during welding processes. This study reviews various reforming techniques implemented by PT. INKA to address these issues. The objectives include evaluating the effectiveness of these techniques and identifying potential improvements. Methods such as post-weld heat treatment (PWHT), controlled cooling, and mechanical tools are analyzed for their ability to mitigate deformation. The study demonstrates that PWHT reduces residual stress and improves material quality by homogenizing the microstructure. Controlled cooling techniques effectively reduce distortion by allowing even temperature distribution during the cooling process. Mechanical tools provide nonthermal methods to stabilize and control deformation, significantly reducing distortion levels. Despite the success of these techniques, PT. INKA faces challenges related to process control and skill variance among workers. The study concludes that while reforming techniques significantly enhance the structural integrity and performance of railway components, consistent implementation and clear guidelines are essential for future improvements. Developing new technologies, enhancing workforce training, and creating comprehensive process guidelines are recommended to maintain high standards and competitiveness in the global market.

Keywords


Railway Manufacturing, Residual Stress, Reforming

Full Text:

PDF

References


Akella, S., Kumar, B. R., & Krshnaiah, Y. (2013). Optimisation of Welding Process Parameters for Distortion Control with Taguchi. . . International Journal of Precision Technology, 3. https://doi.org/10.1504/ijptech.2013.053305

Amirullah, M. A. (2018). Analisa Pengaruh Tegangan Sisa Pengelasan Terhadap Kekuatan Rangka Tubular. Jurnal Teknologi ITS, 7.

Arifin, A. & Hendrianto, M. (n.d.). Pengaruh Arus dan Jarak Kampuh Pengelasan Terhadap Distorsi Smbungan Pelat Baja Karbon Rendah Dengan Menggunakan SMAW. Teknik Mesin Untirta, 6(1), 20–25.

Bandriyana, B. (2006). Perhitungan Distribusi Tegangan Sisa Dalam Pengelasan Sambungan T Pada Sistem Pemipaan. Prosiding Semiloka Teknologi Simulasi dan Komputasi serta Aplikasi.

Budiman, A. (2024). Simulasi Distribusi Termal, Tegangan Sisa, dan Distorsi Pada Sambungan Dissimilar Branch Weld Pipa Material Carbon Steel Dengan Indonel 625 Menggunakan Elemen Hingga.

Cao, X., Rivaux, B., Jahazi, M., Cuddy, J., Birur, A. (2009). Effect of Pre and Post Weld Heat Treatment on Metallurgical and Tensile Properties of Inconel 718 alloy. Journal Material Science, 44.

Dong, Pingsha, Song, Shaopin, Zhang, J. (2014). Analysis of Residual Strees Relief Mechanisms in Post Weld Heat Treatment. International Journal of Pressure Vessels and Piping 122.

Iqbal, M. dkk. (2020). Pengaruh Reforming Terhadap Sifat Mekanik dan Ketahanan Korosi Baja Krbon Rendah SS420. Universitas Negeri Semarang.

Jhonson, A., et al. (2020). Controlled Cooling Techniques for Welding Distortion Mitigation. Journal of Welding Technology, 45(2), 112–125.

Kanga, H. T., Leeb, Y.L., Sun, X. J. (2017). Effect of Residual Stress and Heat Tereatment on Fatigue Strength of Weldments. Materials Science and Engineering. Materials Science and Engineering, 479, 37–43.

Kazanjian, C. (2017). Post Weld Haet Treatment Methods and Their Effects on Residual Stresses in Welded Structures. Journal of Materials Engineering and Perfomance, 26(9), 4345–4357.

Khan, A. et al. (2020). Adjustable Mechanical Support System for Welding Distortion Control. Welding Journal, 99(3), 45–50.

Kozak, J., & Kowalski, J. (2015). The Influence of Manufacturing Oversizing on Post Welding Distortions of The Fillet Welded Joint. Polish Maritime Research, 22, 59–63.

Krebs, J. & Kassner, M. (2007). Influence of Welding Residual Stresses on Fatigue Design of Components. Weld World, 51, 54–68.

Oliveira, D. et al. (2018). Control of Welding Distortion Using Mechanical Device. Journal of Manufacturing Science and Engineering, 140, 5.

Pangesti, A. A. (2017). Analisa Tegangan Sisa Dan Distorsi Pada Sambungan Tubular Tipe T Dengan Pengaruh Post Weld Heat Treatment Menggunakan Metode Elemen Hingga. Institute Teknologi Sepuluh November.

Prachya, P., & Poopat, B. (2015). Investigation into The Influence of Post Weld Heat Treatment on The Microstructure and Hardness of Inconel X-750. Journal of Advances in Mechanical Engineering, 1–11.

Purkuncoro, A. E. (2020). Analisis Pengaruh Proses Anneling Untuk Menghilangkan Tegangan Sisa Akibat Proses Pengelasan Pada Pembuatan Drum Ketel Uap. Jurnal Cendekia Eksakta, 39(2).

Sharma, S. D., Saluja, R., & Moeed, K. M. (2013). A Review on Effect of Preheating and/or Post Weld Heat Treatment (PWHT) on Hardened Steel. International Journal of Technical Research and Applications, 1(2), 05–07.

Suharno, Sugiyanto A., D. (2012). Advantage of SWET Technique on Joining Inconel 792 Material. Global Journal of Research in Engineering Mechanical and Mechanics Engineering, 12(6), 2249–4596.

Wiryosumarto, H. & Okumura, T. (2008). Teknologi Pengelasan Logam.

Zhang, Y., Liu, X., & Wang, S. (2019). Controlled Cooling Techniques to Mitigate Welding Distortion in Aluminium Alloys. International Journal of Advanced Manufacturing Technology, 103(1–4), 345–356.




DOI: https://doi.org/10.31315/jmept.v5i1.12772

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Stephanus Yosi Kristanta

Journal of Metallurgical Engineering and Processing Technology indexed by:

 


 



Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats