A Short Review on Potential of Utilization Used Bottle Made from Polyethylene Terephthalate (PET) in Indonesia

Gema Fitriyano, Dicka Ar Rahim

Abstract


The use of bottles made from Polyethylene Terephthalate (PET) has been increasing along with the development of ready-to-drink products. This type of packaging is very popular with the beverage industry because it is easily formed, strong, transparent, hygienic and economical. The increase in the use of PET bottles has an impact on the amount of waste that also increases so that it can become an environmental problem if it is not handled properly. The waste is still untapped in Indonesia, its utilization has only reached the stage of producing PET chopped which are then exported to countries that have beverage bottle recycling industries. This study aims to review the handling of used bottle waste, processing methods, shortcomings and advantages of products where this review is based on industry data and scientific articles. The consumption of beverages in PET bottle packaging which is increasing every year is a very promising potential for the development of research and the construction of industries related to processing used PET bottles in Indonesia

Keywords


botol bekas; PET; polyethylene terephthalate; pemanfaatan limbah

References


Abbas, A. S. (2014). Alkaline Depolymerization of Polyethylene Terephthalate Plastic Waste. Tikrit Journal of Engineering Sciences, 21(2), 1–8.

Abdelaal, M. Y., Sobahi, T. R., & Makki, M. S. I. (2008). Chemical Degradation of Poly(Ethylene Terephthalate). International Journal of Polymeric Materials, 57, 73–80.

Al-Sabagh, A. M., Yehia, F. Z., Eshaq, G., Rabie, A. M., & ElMetwally, A. E. (2016). Greener routes for recycling of polyethylene terephthalate. Egyptian Journal of Petroleum, 25, 53–64.

American Chemistry Council. (2017). 2016 United States National Postconsumer Plastic Bottle Recycling Report.

Chowdhury, S., Maniar, A. T., & Suganya, O. (2013). Polyethylene Terephthalate (PET) Waste as Building Solution. International Journal of Chemical, Environmental & Biological Sciences, 1(2), 308–312.

Fitriyano, G., Susanty, Huseini, M. R., & Al‟aizzah, N. L. (2018). Pengaruh Waktu Cetak Terhadap Karakteristik Panel Back Splash dari Pemanfaatan Botol PET Bekas. In SEMRESTEK 2018 (pp. 433–439). Jakarta: Fakultas Teknik Universitas Pancasila.

Jankauskaitė, V. (2016). Recycled Polyethylene Terephthalate Waste for Different Application Solutions. Environmental Research, Engineering and Management, 5–7.

JANKAUSKAITĖ, V., MACIJAUSKAS, G., & LYGAITIS, R. (2008). Polyethylene Terephthalate Waste Recycling and Application Possibilities: a Review. MATERIALS SCIENCE (MEDŽIAGOTYRA), 14(2), 119–127.

Karl-H. Foerster. (2018). PlasticsEurope Annual Review 2017-2018.

Krishnamoorthy, M., Tensing, D., Sivaraja, M., & Krishnaraja, A. R. (2017). DURABILITY STUDIES ON POLYETHYLENE TEREPHTHALATE (PET) FIBRE REINFORCED CONCRETE. International Journal of Civil Engineering and Technology, 8(10), 634–640.

Mahmudah S., R., & Atmaja, L. (2012). Pengaruh Konsentrasi Katalis Kalium Karbonat pada Proses Depolimerisasi Limbah Botol Plastik Polietilen Tereftalat (PET). JURNAL SAINS DAN SENI ITS, 1(1), C4–C9.

Marques, D. V., Barcelos, R. L., & Magnago, R. F. (2017). Reuse of post-consumer polyethylene terephthalate in the construction industry. In 6th International Workshop | Advances in Cleaner Production – Academic Work (p. 7). Sao Paolo.

Mohamed, R. M. S. R., Wurochekke, A. A., Misbah, G. S., & Kassim, A. H. bin M. (2014). Energy Recovery from Polyethylene Terephthalate(PET) Recycling Process. GSTF International Journal of Engineering Technology, 2(4), 39–44.

Nurdianto, P., Nugraheni, I. K., & Ivana, R. T. (2016). PENGUJIAN BAHAN BAKAR BIOFUEL HASIL PIROLISIS BOTOL PLASTIK PADA SEPEDA MOTOR. Jurnal Elemen, 3(1), 1–6.

Plastic Waste Management Institute. (2009). An Introduction to Plastic Recycling.

Pratikto. (2010). Beton Ringan Ber-agregat Limbah Botol Plastik jenis PET (Poly Ethylene Terephthalate). POLI TEKNOLOGI, 9(1), 22–29.

Sarker, M., Kabir, A., Rashid, M. M., Molla, M., & Mohammad, A. S. M. D. (2011). Waste Polyethylene Terephthalate (PETE-1) Conversion into Liquid Fuel. Journal of Fundamentals of Renewable Energy and Applications, 1, 5.

Sharon, C., & Sharon, M. (2012). Studies on Biodegradation of Polyethylene terephthalate: A synthetic polymer. Journal of Microbiology and Biotechnology Research, 2(2), 248–257.

Sojobi, A. O., Nwobodo, S. E., & Aladegboye, O. J. (2016). Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete. Cogent Engineering, 3, 28.

Suhariyanto. (2019a). BULETIN STATISTIK PERDAGANGAN LUAR NEGERI

EKSPOR 2018. Jakarta.

Suhariyanto. (2019b). BULETIN STATISTIK PERDAGANGAN LUAR NEGERI IMPOR 2018. Jakarta.

World Nuclear Association. (2018). Heat Values of Various Fuels. In General sources NIST Chemistry WebBook (p. 1). London: World Nuclear Association.




DOI: https://doi.org/10.31315/e.v16i1.2747

Refbacks

  • There are currently no refbacks.

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Eksergi p-ISSN  1410-394X, e-ISSN 2460-8203,  is published by "Prodi Teknik Kimia UPN Veteran Yogyakarta".

Contact  Jl. SWK 104 (Lingkar Utara) Condong catur Sleman Yogyakarta

 

 Creative Commons License

Eksergi by http://jurnal.upnyk.ac.id/index.php/eksergi/index/ is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

 

Lihat Statistik Jurnal Kami

slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor