Email this article 
Living room design using Kansei Engineering approach with toddler safety aspect
Abstract
Toddlers experience physical accidents in the house at a rate of 90 percent. Based on observations, the living room was the most dangerous part of the building compared to other parts. That condition made the parents feel that the safety of their little one was not fully supported. This study aims to design a living room that is safe and comfortable for Toddlers. The design output supports the interior designers in creating a safer Toddler environment. Kansei Engineering guides the identification of living room design for parents looking for their toddlers' safety. The Kansei words gathered from the study are comfortable, multifunction, safe, easy to clean, simple, large capacity, and harmonious. These Kansei words injected into the concept design, which is the harmonious design concept and the simple design concept, by using Principal Component Analysis. The harmonious design has a wood table (X5.1) with a sofa (X7.2) and TV (X9.1) and no flower vase (X11.2) as its decoration, while the simple design has a plastic table (X5.2) with a wood seat (X7.1) and with flower vase (X11.1) but no TV (X9.2). The insights gathered were designed with Blender 3D and integrated with virtual reality Oculus simulation through the SketchFab website.
Keywords
Full Text:
PDFReferences
C. Meriem, M. Khaoula, C. Ghizlane, M. Asmaa, and A. Ahmed, "Early Childhood Development (0 - 6 Years Old) from Healthy to Pathologic: A Review of the Literature," Open Journal of Medical Psychology, vol. 9, no. 3, pp. 100-122, June 2020.
K. K. Schmeer and A. J. Yoon, "Home sweet home? Home physical environment and inflammation in children," Social Science Research, vol. 60, pp. 236-248, Apr. 2016.
J. Ban and L. Chen, "Evaluation of the factors influencing the housing safety awareness of residents in Shanghai," PloS One, vol. 15, no. 1, pp. 1-15, Jan. 2020.
J. Reece, “More Than Shelter: Housing for Urban Maternal and Infant Health”, International journal of environmental research and public health, Vol. 18, no. 7, Mar. 2021.
Kementerian Kesehatan Republik Indonesia, "Laporan Riskesdas 2018 Nasional," Jakarta, Indonesia, pp. 261, Sept. 2018.
L. A. Gheshlaghi, A. Rastegar, M. M. Binabaj, H. R. Shoraka, and M. Fallahi, "Analysis of the home accidents and their risk factors in Iran: A systematic review and meta-analysis," Iranian Journal of Public Health, vol. 52, no. 9, pp. 1855-1865, Sept. 2023.
F. Alamr, H. M. A. Alzahrani, A. M. A. Alghamdi, A. S. A. Alzhrani, F. A. A. Alzahrani, L. M. A. Alkhediwi, M. A. A. Alghamdi, M. A. M. Alhomrani, and O. M. Aburaida, "Prevalence and risk factors of home accidents among children under five years of age in Al-Baha, Saudi Arabia," Cureus, vol. 15, no. 10, Oct. 2023.
E. Dolgun, A. Kalkim, and S. Ergün, "The determination of home accident risks and measures to prevent accident of children: Quasi-experimental research," Turkish Journal of Family Medicine and Primary Care, vol. 11, no. 2, pp. 100-107, Jun. 2017.
E. M. Y. Kim, H. N. Lee, Y. K. Lee, J. S. Kim, and H. Cho, "Analysis of research on interventions for the prevention of safety accidents involving Toddlers: a scoping review," Child Health Nursing Research, vol. 28, no. 4, pp. 234-246, Oct. 2022.
S. Dewi, F. P. Suprobo, and P. F. Nilasari, "Perancangan furniture set untuk aktivitas keluarga di ruang keluarga pada area hunian," Intra, vol. 5, no. 2, pp. 45-54, 2017.
R. S. Wahyuni, E. Nursubiyantoro, and K. D. Agustin, "Rancangan Pengembangan Produk Kotak Sepatu Berdasarkan Preferensi Konsumen," Opsi, vol. 14, no. 1, pp. 1-9, Jun. 2021.
M. S. A. Khannan, A. Tontowi, M. Herliansyah, and A. Sudiarso, "New product development method trends and future research: A systematic literature review," Jurnal Teknik Industri, vol. 23, no. 1, pp. 11-24, May 2021.
S. Parman, D. Perdana, S. Kurniawan, and R. Juanda, “Kansei Engineering Method Survey Paper in Designing and Implementing Market Needs”, Journal of Community Service, Vol.3, no. 3, pp.234-249, Jan. 2022.
M. Nagamachi, KANSEI/AFFECTIVE ENGINEERING. Boca Raton, CRC Press, 2011.
F. Wang, I. Buranaut, B. Zhang, and J. Liu, "Emotional matching model construction of the interior interface form of age-friendly housing in Jinan city examined using Kansei engineering," Heliyon, vol. 10, no. 7, Apr. 2024.
N. L. S. Adnyani and R. Govindaraju, "Development of Kansei engineering-based method for service improvement in hotel operations," Jurnal Rekayasa Sistem Industri, vol. 9, no. 3, pp. 177-188, Oct. 2020.
S. Campbell, M. Greenwood, S. Prior, T. Shearer, K. Walkem, S. Young, D. Bywaters, and K. Walker, "Purposive sampling: complex or simple? Research case examples," Journal of Research in Nursing, vol. 25, no. 8, pp. 652-661, Jun. 2020.
I. Etikan, "Comparison of convenience sampling and purposive sampling," American Journal of Theoretical and Applied Statistics, vol. 5, no. 1, pp. 1-4, Jan. 2016.
S.-W. Kim and J.-M. Gil, "Research paper classification systems based on TF-IDF and LDA schemes," Human-centric Computing and Information Sciences, vol. 9, no. 1, Aug. 2019.
S. Qaiser and R. Ali, "Text mining: use of TF-IDF to examine the relevance of words to documents," International Journal of Computer Applications, vol. 181, no. 1, Jul. 2018.
S. P. Mishra, U. Sarkar, S. Taraphder, S. Datta, D. P. Swain, R. Saikhom, S. Panda, and M. Laishram, "Multivariate statistical data analysis - Principal Component Analysis (PCA)," International Journal of Livestock Research, vol. 7, no. 5, pp. 150-156, May 2017.
M. H. Mud’is, B. Busro, B. Faizin, and H. Ali, "Implementation of Kansei engineering on academic information system interface design based on Android," J. Phys.: Conf. Ser., vol. 1402, no. 6, Dec. 2019.
T. Dovramadjiev, “Modern accessible application of the system Blender in 3D design practice," Publishing House "Union of Scientists - Stara Zagora", Vol. 5, no. 4, pp. 10-13, Jun. 2015.
"Features — Blender," Blender, https://www.blender.org/features/.
L. Flavell, Beginning Blender: Open Source 3D Modelling, Animation, and Game Design. New York, Apress, 2010.
Kementerian Pemberdayaan Perempuan dan Perlindungan Anak Republik Indonesia, "Pedoman Standard Ruang Bermain Ramah Anak (RBRA)," Jakarta, Indonesia, pp. 18-21, 2021.
A. Berni and Y. Borgianni, "Applications of virtual reality in engineering and product design: Why, what, how, when and where," Electronics, vol. 9, no. 7, 2020.
L. Tsoulfidis and I. Athanasiadis, “A new method of identifying key industries: a principal component analysis,” Economic Structures, vol. 11, no. 2, pp. 1-23, Mar. 2022.
L. Widodo, I. Sukania, and R. Sugiono, "Rancangan furniture dan tata ruang dengan dimensi terbatas secara ergonomis," J. Ilm. Tek. Ind., vol. 4, no. 2, May 2017.
S. Mahimkar, Ar Ketaki, and Ar Ashwini, "Indoor comfort in dwellings: An exploratory study of diverse design approaches," Int. J. Recent Trends Eng. Res., vol. 3, no. 12, Dec. 2018.
M. Celadyn, "Interior architectural design for adaptive reuse in application of environmental sustainability principles," Sustainability, vol. 11, no. 14, 2019.
Y. Kuang and W. Zhang, “The application of minimalist style in interior design”, Advance in Social Science, vol. 144, 2017.
DOI: https://doi.org/10.31315/opsi.v17i2.13236
Refbacks
- There are currently no refbacks.
Secretariat:
Industrial Engineering Department
Faculty of Industrial Engineering, UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id
indexed by:
 |  |  |  |
 |  |  |  |
 |
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
View My Stats