Email this article 
Layout Redesign to Eliminate Stagnation Using Blocplan to Increase Production Efficiency
Abstract
The rapid growth of the automotive industry was also followed by growth in subsidiary companies. One of the subsidiary companies is a company that produces auto parts such as wheels. Sales volume in 2021 increased to more than 2 million products while for 2022 to April it was more than 1 million products. High demand is not accommodated due to inadequate production capacity, one of which is the machining area. This study aims to increase efficiency by redesigning the layout of the factory which is considered to increase production results in the machining area. The method used in this research is Block Layout Overview with Computerized Planning using Logic and Algorithm (Blocplan). The results showed that the redesign of the machining area could reduce stagnation by adding 1 unit of multi drill machine. Relayout in the machining area can reduce 93” time stagnation for the K2SA rear ABS type which can produce 2 outputs at once. The delay in the machining area can be reduced from 4,863 seconds to 0 seconds.
Keywords
Full Text:
PDFReferences
Adiyanto, O., & Clistia, A. F. (2020). Perancangan Ulang Tata Letak Fasilitas UKM Eko Bubut dengan Metode Computerized Relationship Layout Planning (Corelap). Jurnal Integrasi Sistem Industri, 7(1), 49–56.
Afifah, N., Ngatilah, Y., Studi, P., Industri, T., Teknik, F., Pembangunan, U., Veteran, N., & Timur, J. (2020). Analisis Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Metode Systematic Layout Planning (SLP) Di PT. Elang Jagad. Juminten, 1(4), 104–116.
http://juminten.upnjatim.ac.id/index.php/juminten
Al-Bayati, I. I., & Al-Zubaidy, S. S. (2021). A study to improve plant layout design for minimizing production costs. IOP Conference Series: Materials Science and Engineering, 1067(1), 012096. https://doi.org/10.1088/1757-899x/1067/1/012096
Amalia, R. R., Ariyani, L., & Noor, M. (2017). Perancangan Ulang Tata Letak Fasilitas Industri Tahu dengan Algoritma Blocplan Di UD. Pintu Air. Teknologi Agro-Industri, 4(2), 89–100.
Daya, M. A., Sitania, F. D., & Profita, A. (2019). Perancangan Ulang (re-layout) tata letak fasilitas produksi dengan metode blocplan (studi kasus: ukm roti rizki, Bontang). PERFORMA: Media Ilmiah Teknik Industri, 17(2), 140–145. https://doi.org/10.20961/performa.17.2.29664
Gogi, V. S., Rohit, D., Kiran, S., & Shaikh, S. M. (2014). Efficiency Improvement of a Plant Layout. International Journal of Innovative Research in Science, Engineering and Technology, 3(4), 11203–11209. https://doi.org/2014/4
Gosende, P. P., Mula, J., & Madroñero, M. D. (2021). Facility layout planning. An extended literature review. International Journal of Production Research, 59(12), 3777–3816. https://doi.org/10.1080/00207543.2021.1897176
Gunanti, N. A., Subagyo, A. M., Herwanto, D., & Arifin, J. (2021). Optimasi Tata Letak Fasilitas Menggunakan Algoritma Blocplan dan Corelap. Journal of Industrial and Manufacture Engineering, 5(2), 107–120. https://doi.org/10.31289/jime.v5i2.5555
Irwanto, A., Arifin, D., & Arifin, M. M. (2020). Peningkatan Kualitas Produk Gearbox Dengan Pendekatan DMAIC Six Sigma Pada PT. XYZ. Jurnal KaLIBRASI-Karya Lintas Ilmu Bidang Rekayasa Arsitektur Sipil Industri, 3(1), 1–17. https://doi.org/10.37721/kalibrasi.v3i1.638
Kovács, G. (2019). Layout design for efficiency improvement and cost reduction. Bulletin of the Polish Academy of Sciences: Technical Sciences, 67(3), 547–555. https://doi.org/10.24425/bpasts.2019.129653
Kovács, G., & Kot, S. (2017). Facility layout redesign for efficiency improvement and cost reduction. Journal of Applied Mathematics and Computational Mechanics, 16(1), 63–74. https://doi.org/10.17512/jamcm.2017.1.06
Lekan, O. K., Kayode, O. I., & Morenikeji, A. A. (2017). Analysis of Plant Layout Design for Operational Efficiency with Craft Algorithms. Acta Universitatis Danubius: Oeconomica, 13(4), 15–27.
Liu, H., Liu, X., Lin, L., Islam, S. M. N., & Xu, Y. (2020). A study of the layout planning of plant facility based on the timed Petri net and systematic layout planning. PLoS ONE, 15(9 September), 1–23. https://doi.org/10.1371/journal.pone.0239685
Mebrat, B., Assefa, L., Gezehagan, T., Achamu, G., & Balasundaram, K. (2020). Redesign the Plant layout for Efficiency Improvement and Cost Reduction: A Case Study. International Journal of Advances in Scientific Research and Engineering, 06(11), 46–54. https://doi.org/10.31695/ijasre.2020.33925
Mirzaei, N., Nejad, M. G., & Fernandes, N. O. (2021). Combining Line Balancing Methods and Discrete Event Simulation: A Case Study from a Metalworking Company. International Journal of Industrial Engineering and Management, 12(1), 14–24. https://doi.org/10.24867/IJIEM-2020-1-273
Satriyo, M., Arifin, M. M., & Agustin, M. (2017). Analisa Perbaikan Waktu Standard Proses Entrepot Di Departemen Logistik PT. Mercedes Benz Indonesia. Jurnal KaLIBRASI-Karya Lintas Ilmu Bidang Rekayasa Arsitektur Sipil Industri, 12(1), 16–40.
https://doi.org/10.37721/kalibrasi.v12i0.343
Setiawan, I., & Setiawan. (2020). Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study. Jurnal Sistem Dan Manajemen Industri, 4(2), 108–116. https://doi.org/10.30656/jsmi.v4i2.2775
Setiawan, Setiawan, I., Jaqin, C., Prabowo, H. A., & Purba, H. H. (2021). Integration of Waste Assessment Model and Lean Automation to Improve Process Cycle Efficiency in the Automotive Industry. Quality Innovation Prosperity, 25(3), 48–64. https://doi.org/10.12776/qip.v25i3.1613
Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D (1st ed.). CV Alfabeta.
Tranggono, T., Rahmawati, N., & Resmi Hayati, K. (2021). Warehouse layout Design in Manufacturing Industry. International Journal of Eco-Innovation in Science and Engineering, 2(1), 14–19. https://doi.org/10.33005/ijeise.v2i01.36
Ulfiyatul, K., & Suhartini. (2021). Perancangan Ulang Tata Letak Fasilitas Produksi dengan Metode Systematic Layout Planning dan BLOCPLAN untuk Meminimasi Biaya Material Handling pada UD. Sofi Garmen. Journal of Research and Technology, 7(2), 151–162. https://journal.unusida.ac.id/index.php/jrt/article/view/556
Zhang, Y., & Khan, S. A. R. (2017). Importance of Warehouse Layout in Order Fulfilling Process Improvement. International Journal of Transportation Engineering and Technology, 3(4), 49–52. https://doi.org/10.11648/j.ijtet.20170304.11
DOI: https://doi.org/10.31315/opsi.v15i2.8023
Refbacks
- There are currently no refbacks.
Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id
indexed by:
 |  |  |  |
 |  |  |  |
 |
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
View My Stats