A Quality Function Deployment model: Application design for sauce bottle washer

Authors

  • Berty Dwi Rahmawati Department of Industrial Engineering, Universitas Pembangunan Nasional Veteran Yogyakarta, Yogyakarta, Indonesia https://orcid.org/0000-0001-6491-8265
  • Igh Bayogi Putra Pradana Department of Industrial Engineering, Universitas Pembangunan Nasional Veteran Yogyakarta, Yogyakarta, Indonesia
  • Buna Rizal Rachman Department of Engineering Science, Faculty of Engineering and Design, University of Auckland, Auckland, New Zealand

DOI:

https://doi.org/10.31315/opsi.v18i1.14659

Keywords:

Quality function deployment, Sauce bottle washer , House of quality , Product development , Customer need

Abstract

Small and Medium Enterprises (SMEs) play a crucial role in employment generation and contribute substantially to national economic development, particularly in developing countries. This study examines an SME in Yogyakarta that produces, on average, 175 crates (4,200 bottles) of sauce and 5 crates (1,200 bottles) of sweet sauce daily. The bottle washing process is currently performed manually, requiring up to 3,737 minutes per day. This inefficiency increases labor dependency and delays production due to the unavailability of clean bottles. To address this issue, the study adopts the Quality Function Deployment (QFD) method to translate customer needs into technical specifications for product development. The House of Quality (HoQ) framework is utilized to identify twelve critical product attributes that inform the design of a sauce bottle washer. The resulting design comprises 17 components, including a main frame, dynamo, washing basin, bottle holder, bearing units, inner brush shafts, pulley shafts, brushes, pulleys (2.5-inch and 10-inch), gears, V-belts, chains, caps, wheels, switches, and stoppers. The implementation of this washing system successfully reduces the total bottle washing time by 720 minutes per day. This improvement enables the SME to meet its daily production targets more effectively and contributes to increased operational efficiency.

References

[1] S. Rianmora and S. Werawatganon, “Applying quality function deployment in open innovation engineering,” J. Open Innov. Technol. Mark. Complex., vol. 7, no. 1, pp. 1–20, 2021, doi: 10.3390/joitmc7010026.

[2] World Economic Forum, “Indonesia’s SMEs are key to development.” Accessed: Oct. 26, 2024. [Online]. Available: https://www.weforum.org/agenda/2021/09/how-can-indonesian-smes-scale-up/

[3] F. A. S. M. Aris Pujiyanto, Dwi Putrianan N Kinding, Muhamad Solekan, “Penerapan IPTEK dalam peningkatkan kapasitas produksi keripik pisang pada UMKM Safnur di Desa Lengkong Kecamatan Rakit Kabupaten Banjarnegara ( Application of Science and Technology in Increasing Banan,” no. 3, 2024.

[4] Kementrian Koperasi dan UMKM, “Kerangka acuan kerja pengadaan jasa lainnya tenaga pendukung pengembangan kewirausahaan melalui sinergi dengan dunia usaha dan industri.”

[5] The SMERU Research Institute, “Bangkit dan berjuang_ potret kondisi usaha kecil dan menengah _ The SMERU Research Institute.” [Online]. Available: https://smeru.or.id/id/event-id/fkp2023seri4

[6] A. F. Mulyadi and E. F. Santoso, “Peningkatan kapasitas dan efisiensi produksi UMKM minuman sari buah,” J. Innov. Appl. Technol., vol. 1, no. 1, pp. 37–43, 2015.

[7] A. Nur’Aini and D. Mariani, “Pengaruh efisiensi , pertumbuhan penjualan , modal kerja , dan umur perusahaan terhadap profitabilitas perusahaan ( studi empiris pada perusahaan yang menerbitkan saham syariah yang terdaftar dalam Jakarta Islamic Index 70 ( JII70 ) periode 2019 – 2023 ),” vol. 2, no. 4, 2024.

[8] E. Nursanti, R. M. S. Avief, Sibut, and M. Kertaningtyas, Maintenance capacity planning efisiensi & produktivitas. 2019.

[9] D. H. Besterfield, G. H. Besterfield, M. Besterfield-Sacre, R. Urdhwareshe, C. Besterfield-Michna, and H. Urdhwareshe, Total Quality Management revised third edition for Anna University. 2012.

[10] D. Rahmayani, D. Meilani, H. R. Zadry, and D. A. Saputra, Perancangan produk dan aplikasinya, vol. 11, no. 1. 2019.

[11] I. Pratiwi and I. W. Jannah, “Redesign of workstations to minimize musculoskeletal disorders for guitar workers in Indonesia,” Opsi, vol. 17, no. 1, p. 81, 2024, doi: 10.31315/opsi.v17i1.10837.

[12] S. Assauri, Manajemen produksi dan operasi. 2008.

[13] A. Putra Irawan and K. Nadliroh, “Perancangan mesin pencuci pisang semi otomatis dengan kapasitas 120 kg/jam,” Semin. Nas. Inov. Teknol. UN PGRI Kediri, pp. 24–2021, 2021.

[14] S. Sumarni and B. Harjanto, “Mesin pengrajang karak untuk meningkatan efisiensi produksi,” Senadimas, no. September, 2019, [Online]. Available: http://ejurnal.unisri.ac.id/index.php/sndms/article/view/3286%0Ahttps://ejurnal.unisri.ac.id/index.php/sndms/article/download/3286/2768

[15] A. Widyianto, O. A. Hidayat, R. R. Laksistya, and R. Nur, “Peningkatan produktivitas dan efisiensi UMKM Kelorida melalui penggunaan mesin penepung daun kelor,” vol. 6, no. 1, pp. 501–509, 2025.

[16] I. W. R. Taifa and T. N. Vhora, “Cycle time reduction for productivity improvement in the manufacturing industry,” J. Ind. Eng. Manag. Stud., vol. 6, no. 2, pp. 147–164, 2019, doi: 10.22116/JIEMS.2019.93495.

[17] L. M. V. de Oliveira, H. F. dos Santos, M. R. de Almeida, and J. A. F. Costa, “Quality Function Deployment and Analytic Hierarchy Process: A literature review of their joint application,” Concurr. Eng. Res. Appl., vol. 28, no. 3, pp. 239–251, 2020, doi: 10.1177/1063293X20958936.

[18] M. A. Roy, G. Abdul-Nour, and S. Gamache, “Implementation of an industry 4.0 strategy adapted to manufacturing SMEs: simulation and case study,” Sustain., vol. 15, no. 21, 2023, doi: 10.3390/su152115423.

[19] F. Francis, “Engineering approach with Quality Function Deployment for an ABET accredited program: A case study,” Am. J. Mech. Eng., vol. 4, no. 2, pp. 65–70, 2016, doi: 10.12691/ajme-4-2-4.

[20] L. T. Willman, T. Afifah, M. N. Banurea, and I. Ismianti, “ECABLE (External Catheter Flexible) innovation of catheter external products for women,” Opsi, vol. 16, no. 2, p. 200, 2023, doi: 10.31315/opsi.v16i2.11435.

[21] I. Ismianti, H. Herianto, and A. Ardiyanto, “Studi antropometri mahasiswa Indonesia bersuku Batak dan Jawa,” J. Ergon. Indones. (The Indones. J. Ergon., vol. 5, no. 2, p. 47, 2019, doi: 10.24843/jei.2019.v05.i02.p01.

[22] R. Ginting, A. Ishak, A. Fauzi Malik, and M. R. Satrio, “Product development with Quality Function Deployment (QFD) : A literature review,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1003, no. 1, p. 012022, 2020, doi: 10.1088/1757-899x/1003/1/012022.

[23] A. Cimino, D. Curcio, F. Longo, and G. Mirabelli, “Workplaces effective ergonomic design: A literature review,” 20th Eur. Model. Simul. Symp. EMSS 2008, no. January, pp. 853–862, 2008.

[24] P. Marková, D. Vrecková, M. Mĺkva, P. Szabó, and M. Čambál, “The impact of ergonomic rationalisation on the efficiency and productivity of the production process,” Adm. Sci., vol. 15, no. 2, 2025, doi: 10.3390/admsci15020062.

[25] J. D. Lee and B. D. Seppelt, “Human factors and ergonomics in automation design,” Handb. Hum. Factors Ergon. Fourth Ed., no. March 2012, pp. 1615–1642, 2012, doi: 10.1002/9781118131350.ch59.

[26] J. P. Ficalora and L. Cohen, Quality Function Deployment and Six Sigma, A QFD Handbook, Second. Indiana: Pearson Education, Inc., 2010.

[27] J. P. Ficalora and L. Cohen, Quality Function Deployment and Six Sigma. 2009.

[28] R. S. Bridger, Introduction to Ergonomics, vol. 13, no. 2. London: Routledge, 2003. doi: 10.1016/0169-8141(94)90083-3.

[29] H. P. Purba, Inovasi nilai pelanggan dalam perencanaan & pengembangan produk. Yogyakarta: Graha Ilmu, 2009.

[30] K. C. Tan, M. Xie, and T. Ngee, Goh, Advanced QFD Applications. Amerika Serikat: ASQ Quality Press, 2003.

[31] S. Wignjosoebroto, Ergonomi studi gerak dan waktu, Edisi Keem. Surabaya: Guna Widya, 2006.

[32] S. Pheasant, Bodyspace: Ergonomics, Anthropometry and the design of work, Second Edi., vol. 27, no. 5. Philadelphia: Taylor & Francis, 2003. doi: 10.1038/sc.1989.63.

Downloads

Published

2025-06-30